- RS Stock No.:
- 330-7988
- Mfr. Part No.:
- 207143 & T0-1-102/I1/SVB
- Brand:
- Eaton
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 330-7988
- Mfr. Part No.:
- 207143 & T0-1-102/I1/SVB
- Brand:
- Eaton
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Eaton 2-Pole Non-Fused Isolator Switch, 20A, 440V AC - T0-1 Series - T0-1-102/I1/SVB
This non-fused isolator switch from Eaton improves safety in your electrical system thanks to its failsafe shutdown features. Its designed for manual circuit isolation using its single throw rotary handle and locking ring. With its compact measurements of 137 (L) x 80 (W) x 110mm (D), this unit is easy to install in both small and large industrial setups. It's an ideal choice for circuit boards and transmission lines. For additional safety and user control, you can add up to three padlocks to the switch when it's turned off.
Operating temperature range from -25°C to +50°C for use in harsh environments
Screw terminal type for quick installation and reliable connections
Ingress protection rating of IP65 for protection against dust, liquid splashes and condensation
Screw terminal type for quick installation and reliable connections
Ingress protection rating of IP65 for protection against dust, liquid splashes and condensation
Whats the maximum voltage of this disconnector switch?
This disconnector switch features a maximum voltage rating of 440V AC, making it ideal for use in high-energy industrial systems.
Is this isolator switch insulated?
Yes, this isolator switch is completely insulted in an impact-resistant thermoplastic body.
Specifications
Attribute | Value |
---|---|
Number of Poles | 2P |
Maximum Current | 20A |
IP Rating | IP65 |
Power Rating | 6.5kW |
Voltage Rating | 690V |
Electrical Phase | 1 |
Handle Colour | Red |
Accepts Padlocks | Yes |
Normal State Configuration | NO |
Auxiliary Contacts Available | Yes |
Series | T0-1 |
Switch Rating | 320A |
Length | 137mm |
Width | 80mm |
Depth | 75mm |
Minimum Operating Temperature | -25°C |
Terminal Type | Screw |
Maximum Operating Temperature | +50°C |