PSENmag Magnetic Safety Switch, Plastic, 24 V dc

  • RS Stock No. 619-2818
  • Mfr. Part No. 504220
  • Brand Pilz
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

PSENmag Non Contact Switches, Square

The PSENmag Non-contact Switch meets the highest safety requirements offers a complete solution that is safe and economical. It is approved up to PLe of EN ISO 13849-1, SIL 3 of EN/IEC 62061 and Category 4 of EN 954-1.

Features and Benefits

Connected via a plug connection or with cable
Flexible cable outlet, including connector, so there is no need for an angled connector
Flexible mounting, both the sensor and the actuator support every conceivable mounting configuration
Cost effective thanks to series connection
Operating distance of 3 mm or 10 mm
Extra signal contact and LED

Applications

The PSENmag safety switch is suitable for use in applications with heavy soiling, thanks to its non-contact design.

Note

Only stock nos. 744-8702 and 824-4918 have an LED.

Standards

EN954-1 (Cat 4), EN60204-1, EN60947-5-3.

Approvals

CE, cULus Listed, TÜV.

Supplied with

Actuator.

Approvals

BG, cUL, CCC

Caution

EN60947-5-3 standard is only met if entire system consisting of safety switch (PSENmag), actuator (PSENmag) and a safety monitoring module (PNOZ X) is used.

Specifications
Attribute Value
Supply Voltage 24 V dc
Safety Contacts 2NO
Housing Material Plastic
Connection Type M8
Switch Type Square
Range PSENmag
Switching Distance 8 mm, 12 mm
IP Rating IP67
Actuator Included Yes
Width 26mm
Actuator Type Magnetic
Sensor Principle Magnetic
Depth 13mm
Dimensions 42.8 x 26 x 13 mm
Housing Colour Yellow
Safety Category 4
Length 42.8mm
130 in stock for FREE next working day delivery
620 available from Europe for delivery within 1 working day(s).
Price Each
£ 50.48
(exc. VAT)
£ 60.58
(inc. VAT)
Units
Per unit
1 +
£50.48
Related Products
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiring Possible to provide protection against defeat in accordance with VDE 060 by concealing the installation Simplified installation and adjustment.
The Sensa Guard Non-Contact Switch is PLe, SIL ...
Description:
The Sensa Guard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon ...
The Schneider XCS-DMR coded magnetic safety switches are ...
Description:
The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement ...