Magnetic Safety Switch, PA 6.6

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Different types of coded magnetic switches
Manipulation safety by multi-coding
Redundance by NO and NC contacts
Cannot be operated with conventional magnets
3, 6 and 9 m cable or connector versions
Sturdy plastic enclosures
Switching distances 3 or 4 mm, depending on type
NO contact and NC contact combined for connection to magnetic controller

Temperature range -5°C to +70°C

Specifications
Attribute Value
Safety Contacts NO/NC
Housing Material PA 6.6
Connection Type M12 Connector
Switch Type Coded Magnetic Switch
Switching Distance 4 mm
IP Rating IP67
Sensor Principle Magnetic
Width 1.5mm
Length 25mm
Dimensions 25 x 1.5 x 88 mm
Depth 88mm
2 In stock - FREE next working day delivery available
6 available from Europe for delivery within 1 working day(s)
Price Each
£ 36.88
(exc. VAT)
£ 44.26
(inc. VAT)
Units
Per unit
1 +
£36.88
Related Products
Magnet switches designed for mounting on movable protective ...
Description:
Magnet switches designed for mounting on movable protective guards such as covers, flaps and doors.Suitable for areas where cleaning, disinfecting or contamination is involved IP67 rated For a suitable safety relay, use 528-0908Effective operating distance 4-14mm For a suitable coded magnet, use stock no 528-0857Cable length of 3m. 3SE6, Coded, ...
Smallest design Actuation only possible with BPS260, available ...
Description:
Smallest design Actuation only possible with BPS260, available separately Left-hand or right-hand side versions for door-mounting Control category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlocking Dimensions: L13 x W26 x H36 mm. BNS 260, Miniature Coded.
Substitutes door handle and safety switch in one ...
Description:
Substitutes door handle and safety switch in one IP67 rated unit, no further door fittings required Ideal for small and light movable guards (rotating doors max. 5kg, sliding doors max. 3kg) Tamper-proof due to integral coded safety sensor Control category up to 4 to EN954-1 Latching force of approx. 100N ...
The Pilz PSENcode series non-contact safety switch has ...
Description:
The Pilz PSENcode series non-contact safety switch has an assured switching distance of 15mm. It has 2OSSD RFIDsafety outputs. It is coded and the only switch with an actuator from the PSEN cs3.1 series. Supplied with: Actuator Caution: EN60947-5-3 standard is only met if the entire system consisting of a ...