Sensaguard 440N RFID Safety Switch, Plastic, 24 V dc

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

SensaGuard 440N Rectangular Non-Contact Switch

The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications.

No dedicated controller required for its RFID coding security
Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches)
PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series
Can be connected to standard safety relays, SmartGuards and safety I/O blocks
They provide three different types of PNP output including one auxiliary PNP
Equipped with an LED to indicate the device status and any faults
IP69K environmental rating

Standards

EN 60947-5-3, IEC 61508, EN 954

Specifications
Attribute Value
Supply Voltage 24 V dc
Housing Material Plastic
Range Sensaguard
Terminal Type Cable
Series 440N
IP Rating IP69K
Actuator Included Yes
Depth 20.65mm
Length 88.14mm
Width 24.99mm
Actuator Type Coded
Sensor Principle RFID
Dimensions 88.14 x 24.99 x 20.65 mm
Safety Category 4
Housing Colour Red
6 In stock for FREE next working day delivery
Price Each
£ 116.00
(exc. VAT)
£ 139.20
(inc. VAT)
Units
Per unit
1 +
£116.00
Related Products
Control category up to 3 to EN954-1Output function ...
Description:
Control category up to 3 to EN954-1Output function indicated at rear of switch by LEDIP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm.
Smallest design Actuation only possible with BPS260, available ...
Description:
Smallest design Actuation only possible with BPS260, available separately Left-hand or right-hand side versions for door-mounting Control category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlocking Dimensions: L13 x W26 x H36 mm.
Control category 1 to EN954-1Output function indicated at ...
Description:
Control category 1 to EN954-1Output function indicated at rear of switch by LEDIdeal for lower risk applications, integral evaluation means no additional safety module is required IP67 protection Suitable for food processing industry.
Non-contact actuation Magnetic coded sensing High tolerance to ...
Description:
Non-contact actuation Magnetic coded sensing High tolerance to misalignment LED indication2 N/C solid state relay outputs and 1 PNP auxiliary output Switching current: 200 mA @ 24Vdc Supply Voltage: 24Vdc IP 69K protection rating Category 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems. ...