RS PRO 50Ω Straight Cable Mount N Type Connector, Plug, Solder Termination, 11GHz, Belden 9913, LMR 400

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

This is a low PIM straight N plug connector for flexible cable application. The BELDEN 9913 and LMR400 are the suitable cables for this connector. We suggest that the center contact be assembled with the cable inner conductor by soldering, and the nut be clamped on the cable for transmission and fixing. There is a .685" flat for tool. Low PIM connector series is ideal where PIM (Passive Inter-modulation Distortion) is a concern to the design work. The connectors are designed with low-loss construction and waterproof protection.

Impedance: 50 OHM
Frequency Range: DC-11 GHz
V.S.W.R: 1.1 MAX@6 GHz
Wireless/ Wi-Fi/ GSM base station
Applicable cable: LMRR400,9913
Finish: gold plated center contact & white bronze plated body
Refer to recommended assembly instruction CM-07

Specifications
Attribute Value
Gender Male
Cable Type Belden 9913, LMR 400
Mounting Type Cable Mount
Termination Method Solder
Body Orientation Straight
Impedance 50Ω
Mating Type Threaded
Operating Frequency 11GHz
Size Standard
Minimum Operating Temperature -40°C
Body Plating Bronze
Maximum Operating Temperature +85°C
Contact Plating Gold
Contact Material Brass
Available to back order for despatch 24/02/2020
Price Each
£ 17.44
(exc. VAT)
£ 20.93
(inc. VAT)
Units
Per unit
1 - 9
£17.44
10 - 24
£16.06
25 - 49
£15.26
50 - 99
£14.53
100 +
£13.57
Related Products
N-Type connectors are designed to satisfy the need ...
Description:
N-Type connectors are designed to satisfy the need for a durable, weatherproof, medium-size RF connector with consistent performance through 11 GHz. Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF ...
50 Ohm N series panel mount jack with ...
Description:
50 Ohm N series panel mount jack with a solder termination, PTFE dielectric, silver plated brass body and silver plated centre contact. This 50 Ohm N series panel mount socket has a 25.40mm square flange with 4 x 3.2mm mounting holes and can be rear or front mounted onto the ...
The RS Pro straight bulkhead fitting N-type, female, ...
Description:
The RS Pro straight bulkhead fitting N-type, female, male connector has an N-jack receptacle connector. It will be horizontal to the PC board after soldering on it because of its panel mount type. This connector has the bulkhead function, the applied panel thickness is 0.280in. The low PIM connector series ...
For information regarding appropriate crimp tooling refer to ...
Description:
For information regarding appropriate crimp tooling refer to the Connector/Cable/Tooling Compatibility table at the beginning of this section, in the paper catalogue. Solder bucket contact.