RS PRO Multimeter Test Lead Test Lead Kit, Fused, CAT III 600 V

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

RS PRO Multimeter Lead Set in Pouch

RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard.

RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.

Contents Standard Set

2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black).
Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA.

Also available:
Thin fine insulated prods set 262-7770 for use with fused test prods and multimeter test lead sets
Shuttered lantern probe set 262-7786 for use with fused test prods and multimeter test lead sets.

Typical applications
Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.
Test and Measurement

Safety Precautions
Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.

Standards

EC 1010 Cat III 600V; GS38

Warning

  • Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance.
Specifications
Attribute Value
Lead Type Test Lead Kit
Connector Type Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug
Fused Yes
Lead Length 1.2m
Safety Category Voltage 600V
Safety Category CAT III 600 V
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Safety Category Level CAT III
153 In stock for FREE next working day delivery
Price Each
£ 43.11
(exc. VAT)
£ 51.73
(inc. VAT)
Units
Per unit
1 +
£43.11
Related Products
Set of accessories made up of probes offering ...
Description:
Set of accessories made up of probes offering both more comfortable use and complete safety for operators.These probes are fully compatible with all 4 mm diameter safety terminals.The visible metal part is limited to 19mm to prevent any risk of short-circuit. However, its shape allows access to the connections at ...
Multi-head test lead set with 4 probe profiles ...
Description:
Multi-head test lead set with 4 probe profiles to choose from Interchangeable and reversible probe heads allow multiple combinations of connection and contact Consists of a sprung point to 4mm plug (with hard point), which is reversible2mm and 2.4mm plugs Each probe screws firmly into main bodyA tip protection cap ...
Two non-tripping loop impedance testers that comply with ...
Description:
Two non-tripping loop impedance testers that comply with EN61557 part 3 for testing, measureing or monotoring of protective measures. RCDs rated 30mA or greater are not tripped, even electronic RCDs3-wire low current non tripping loop test measure 0.01Ω to 2kΩ (autoranging) with resolution 0.01Ω up to 10ΩTwo wire high -current ...
Earth loop impedance testers to verify the loop ...
Description:
Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip 30mA RCDs and can be used on a wide range ...