Fluke Test Probe, 2mm Tip, 1 kV, 600 V, 10A

Brought to you by Fluke, a range of Test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

Are you looking for a hassle-free way to test electrical circuits in tight work areas? Grab a pair of these FLUKE test probes. Attach them to your multimeter and use their 2mm tip width to squeeze into hard-to-reach spaces, such as recesses and closely spaced terminals. Thanks to their needle design, these components pinpoint the energy source to ensure accurate measurement of many values, including voltage, resistance, current and temperature. The stainless-steel tips fend off rust to keep your probes functioning in humid environments.

• Attachable to a banana connector for a quick setup
• Safe to check 1100V and 600V to suit varied applications
• Compatible with alligator clips to expand their functionality
• High current rating of 10A for use in powerful electrical systems

• Commercial vehicle workshops
• Aerospace industry
• Wireless communication networks
• Energy production

Yes. As these test probes have CAT III 1000V and CAT IV 600V safety ratings, they withstand impulse voltages of up to 8000V to provide your system with additional electrical protection.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends £150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.co.uk/freefluke
A proof of purchase in the form of a receipt or invoice is required.

CATII 1000V