Chauvin Arnoux PO1120074A Multimeter Current Clamp Adapter, 450mA dc, 300mA ac, 3.9mm With UKAS Calibration

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

K1 and K2 low-current probes

Current probes to measure low DC and AC currents.
Easily adapted to all 19 mm standard spacing multimeters.
Zero reset using a thumb wheel with disable feature.
2 LEDs display overload (red LED) and the correct battery level (green LED).
Applications: loop measurements 4 → 20 mA without opening the circuit, low current measurements, default current measurements etc.


Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category.

Specifications
Attribute Value
Adapter Type AC/DC
Maximum DC Current 450mA
Maximum AC Current 300mA ac
Best Accuracy ±1 %
Resolution 50 (DC) μA, 100 (AC) μA
Calibrated UKAS
Maximum Conductor Size 3.9mm
Safety Category CAT II 300 V
Output Type Current
Connector Type 4 mm
Battery Type 9V
Battery Life 20 h
Cable Length Extended 1.5m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Level CAT II
Model Number p PO1120074A
Safety Category Voltage 300V
2 In stock for delivery within 2 working days
Price Each
£ 527.00
(exc. VAT)
£ 632.40
(inc. VAT)
Units
Per unit
1 +
£527.00
Not available for guaranteed pre 9am/10am delivery
Related Products
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracy Non-intrusive transducing Up to 29 mm Diameter conductor Shock Proof: 5 ft drop Coiled cable output plugs Ergonomically designed jaw and trigger AC-DC 1000 A capability Auto-zero key for DCARed LED - ...
FLIR TA72 Universal Flex Current Probe. The probe ...
Description:
FLIR TA72 Universal Flex Current Probe. The probe accessories are simple and easy to use, designed to get the best readings with your existing meter. Manufactured with a narrow flexible coil clamp, the TA72 lets you easily take measurements in tight or awkward spots. A difficult task with a traditional ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero control for nulling out jaw/sensor offset Superior noise immunity allows ...
Single and dual range mini clamps with nominal ...
Description:
Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac40Hz to 10k Hz bandwidth MN09, MN11 & MN21 ac current output 1mA ac / 1A ac for use with multimeters & recorders with a 200mA ac range MN13, MN39 ac voltage output 10mV ac ...