Chauvin Arnoux PO1120074A Multimeter Current Clamp Adapter, 450mA dc, 300mA ac, 3.9mm With RS Calibration

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

K1 and K2 low-current probes

Current probes to measure low DC and AC currents.
Easily adapted to all 19 mm standard spacing multimeters.
Zero reset using a thumb wheel with disable feature.
2 LEDs display overload (red LED) and the correct battery level (green LED).
Applications: loop measurements 4 → 20 mA without opening the circuit, low current measurements, default current measurements etc.


Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category.

Specifications
Attribute Value
Adapter Type AC/DC
Maximum DC Current 450mA
Maximum AC Current 300mA ac
Best Accuracy ±1 %
Resolution 50 (DC) μA, 100 (AC) μA
Maximum Conductor Size 3.9mm
Calibrated RSCAL
Safety Category CAT II 300 V
Output Type Current
Connector Type 4 mm
Battery Type 9V
Battery Life 20 h
Cable Length Extended 1.5m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Voltage 300V
Model Number p PO1120074A
Safety Category Level CAT II
2 In stock for delivery within 2 working days
Price Each
£ 507.00
(exc. VAT)
£ 608.40
(inc. VAT)
Units
Per unit
1 +
£507.00
Not available for guaranteed pre 9am/10am delivery
Related Products
Display comprises of an 8-digit LCD with a ...
Description:
Display comprises of an 8-digit LCD with a digit height of 8 mm The device is powered by a lithium battery Counter inputs: solid state (4 → 30 Vdc) or voltage (10 → 260 Vac)Reset on panel or external with inhibition option Backlit model available Counting directions can be selected ...
In-Vehicle Dual Port USB Smart Charger with Back ...
Description:
In-Vehicle Dual Port USB Smart Charger with Back light and Dust Cover, 2. 4A. Over voltage, Reverse battery and over current protection. ESD and short circuit protection. Optional tethered dust caps. 2. 4A output current. Battery Operating Voltage: 9V to 16V. Operating temperature: -40°C to 85°C. USB Battery Charging Specification ...
U1701A & U1701B are ergonomic handheld capacitance LCR ...
Description:
U1701A & U1701B are ergonomic handheld capacitance LCR meters, user friendly with overmold and built and tested to be robust for harsh industrial environments. Efficient capacitor sorting with no need to set and reset standard reference, the meter features up to 25 sets of high/low limits that can be stored ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero control for nulling out jaw/sensor offset Superior noise immunity allows ...