Fluke I1010 Multimeter Current Clamp Adapter, 1000A dc, 600A ac, 30mm With RS Calibration
- RS Stock No. 459-3001
- Mfr. Part No. i1010
- Brand Fluke
Fluke Current Probes
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.
| Attribute | Value |
|---|---|
| Adapter Type | AC/DC |
| Maximum DC Current | 1000A |
| Maximum AC Current | 600A ac |
| Best Accuracy | ±2% + 0.5 A |
| Calibrated | RSCAL |
| Maximum Conductor Size | 30mm |
| Safety Category | CAT III 600 V |
| Output Type | Voltage |
| Connector Type | Banana Plug |
| Battery Type | 9V |
| Battery Life | 60 h |
| Maximum Operating Temperature | +50°C |
| Minimum Operating Temperature | -10°C |
| Safety Category Voltage | 600V |
| Safety Category Level | CAT III |
| Model Number p | I1010 |
