Chauvin Arnoux PO1120074A Multimeter Current Clamp Adapter, 450mA dc, 300mA ac, 3.9mm

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

K1 and K2 low-current probes

Current probes to measure low DC and AC currents.
Easily adapted to all 19 mm standard spacing multimeters.
Zero reset using a thumb wheel with disable feature.
2 LEDs display overload (red LED) and the correct battery level (green LED).
Applications: loop measurements 4 → 20 mA without opening the circuit, low current measurements, default current measurements etc.


Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category.

Specifications
Attribute Value
Adapter Type AC/DC
Maximum DC Current 450mA
Maximum AC Current 300mA ac
Best Accuracy ±1 %
Resolution 50 (DC) μA, 100 (AC) μA
Maximum Conductor Size 3.9mm
Safety Category CAT II 300 V
Output Type Current
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 20 h
Cable Length Extended 1.5m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Voltage 300V
Model Number p PO1120074A
Safety Category Level CAT II
2 in stock for FREE next working day delivery
5 available from Europe for delivery within 1 working day(s)
Price Each
£ 458.00
(exc. VAT)
£ 549.60
(inc. VAT)
Units
Per unit
1 +
£458.00
Calibration Options:
Related Products
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for DCARed LED - low battery indicationGreen LED - power on ...
FLIR TA72 Universal Flex Current Probe. The probe ...
Description:
FLIR TA72 Universal Flex Current Probe. The probe accessories are simple and easy to use, designed to get the best readings with your existing meter. Manufactured with a narrow flexible coil clamp, the TA72 lets you easily take measurements in tight or awkward spots. A difficult task with a traditional ...
These compact, lightweight and ergonomic sensors of varying ...
Description:
These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero control for nulling out jaw/sensor offsetSuperior noise immunity allows measurement ...