Chauvin Arnoux Multimeter Current Clamp Adapter

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

MN Series 200A a.c. Mini Clamps

Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac
40Hz to 10kHz bandwidth
MN09, MN11 & MN21 ac current output 1mA ac / 1A ac for use with multimeters & recorders with a 200mA ac range
MN13, MN39 ac voltage output 10mV ac / 1A ac for use with multimeters & recorders with 200mV ac range. MN39 has a dual 20A/200A range with 0.1A ac minimum measurement
Conforms to: IEC1010-2-032 (safety standard) 600V Cat III
MN89 dc voltage output 100m Vdc / 1Aac for use with multimeters & recorders with mV dc and Vdc inputs, advantageous for multimeters as their mV dc ranges are often more sensitive than their ac current ranges
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Fitted with a 1.5m flying lead with 4mm shrouded plugs to suit most multimeters
Output voltage limiter prevents high output voltage if clamp output becomes open circuited (MN11 & MN21 only)

Specifications
Attribute Value
Adapter Type AC
Maximum AC Current 240A ac
Best Accuracy ±1 %
Maximum Conductor Size 20mm
Calibrated RSCAL
Safety Category CAT III 600 V
Output Type Current
Connector Type BNC
Cable Length Extended 1.5m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Voltage 600V
Safety Category Level CAT III
Model Number p MN11
2 In stock for delivery within 2 working days
Price Each
£ 175.00
(exc. VAT)
£ 210.00
(inc. VAT)
Units
Per unit
1 +
£175.00
Not available for guaranteed pre 9am/10am delivery
Related Products
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracy Non-intrusive transducing Up to 29 mm Diameter conductor Shock Proof: 5 ft drop Coiled cable output plugs Ergonomically designed jaw and trigger AC-DC 1000 A capability Auto-zero key for DCARed LED - ...
RS Pro ICA 31 AC current transducer offers ...
Description:
RS Pro ICA 31 AC current transducer offers high specification performance in a rugged, low-cost unit. It can measure up to 400 A ac when used with the ac mV range on a digital multimeter. AC 400 A capability1.9% basic accuracy Non-intrusive transducing Up to 29 mm Diameter conductor Shock ...
FLIR TA72 Universal Flex Current Probe. The probe ...
Description:
FLIR TA72 Universal Flex Current Probe. The probe accessories are simple and easy to use, designed to get the best readings with your existing meter. Manufactured with a narrow flexible coil clamp, the TA72 lets you easily take measurements in tight or awkward spots. A difficult task with a traditional ...
Standard: IEC 1010-1, 600 V Cat. III, deg. ...
Description:
Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category. Current probes to measure low DC and AC currents.Easily adapted to all 19 mm standard spacing multimeters.Zero reset using a thumb wheel with disable feature.2 LEDs display overload (red LED) and the ...