Chauvin Arnoux Multimeter Current Clamp Adapter

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

MN Series 200A a.c. Mini Clamps

Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac
40Hz to 10kHz bandwidth
MN09, MN11 & MN21 ac current output 1mA ac / 1A ac for use with multimeters & recorders with a 200mA ac range
MN13, MN39 ac voltage output 10mV ac / 1A ac for use with multimeters & recorders with 200mV ac range. MN39 has a dual 20A/200A range with 0.1A ac minimum measurement
Conforms to: IEC1010-2-032 (safety standard) 600V Cat III
MN89 dc voltage output 100m Vdc / 1Aac for use with multimeters & recorders with mV dc and Vdc inputs, advantageous for multimeters as their mV dc ranges are often more sensitive than their ac current ranges
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Fitted with a 1.5m flying lead with 4mm shrouded plugs to suit most multimeters
Output voltage limiter prevents high output voltage if clamp output becomes open circuited (MN11 & MN21 only)

Specifications
Attribute Value
Adapter Type AC
Maximum AC Current 240A ac
Best Accuracy ±1 %
Calibrated RSCAL
Maximum Conductor Size 20mm
Safety Category CAT III 600 V
Output Type Current
Connector Type BNC
Cable Length Extended 1.5m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Voltage 600V
Model Number p MN09
Safety Category Level CAT III
6 In stock for delivery within 2 working days
Price Each
£ 144.48
(exc. VAT)
£ 173.38
(inc. VAT)
Units
Per unit
1 +
£144.48
Not available for guaranteed pre 9am/10am delivery
Related Products
The U1117A IR-to-Bluetooth adapter adds Bluetooth connectivity to ...
Description:
The U1117A IR-to-Bluetooth adapter adds Bluetooth connectivity to handheld digital multimeters (DMMs) and U1210 Series handheld meters including U1450A and U1460A series insulation resistance testers. Just attach the U1117A Bluetooth adapter to the IR port of your handheld meter and download the complimentary Mobile Meter and Mobile Logger applications to ...
The FLIR TA74 adds capabilities, simplifies challenges, and ...
Description:
The FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for multiple conductor measurements, double-wrap requirements, and deeper access. The connection is ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero control for nulling out jaw/sensor offset Superior noise immunity allows ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. Hall effect sensing of a.c. and d.c. current ...