Fluke 80AK-A Thermocouple Adapter

  • RS Stock No. 336-8292
  • Mfr. Part No. 80AK-A
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

80AK-A DMM Thermocouple Adapter

Adapter for adjusting K-type thermocouple connectors to fit inputs with 4-mm sockets
For Fluke multimeters with temperature measurement function
Measurement range and accuracy depend on the sensor
Suitable for low-voltage applications (below 30 V ac, 60 V dc)

Specifications
Attribute Value
Accessory Type Thermocouple Adapter
For Use With 87 Series, 87V Series, 89IV Series, 116 Series, 179 Series, 187 Series, 189 Series, 287 Series, 289 Series, 902 Series, 1577 Series, 1587 Series
Model Number p 80AK-A
37 in stock for FREE next working day delivery
53 available from Europe for delivery within 1 working day(s)
Price Each
£ 27.00
(exc. VAT)
£ 32.40
(inc. VAT)
Units
Per unit
1 +
£27.00
Related Products
Universal temperature adaptor utilizing a P-N semiconductor junction ...
Description:
Universal temperature adaptor utilizing a P-N semiconductor junction as the sensing element. The adaptor can be plugged into any standard multimeter with input impedence of 1MΩ or greater to provide direct temperature measurement up to 150°C. Powered by PP3 battery (supplied)Readings in °C or °F, selectableSuitable for measurement of air, ...
The fibre optic meter (FOM) is a digital ...
Description:
The fibre optic meter (FOM) is a digital multimeter accessory that allows fibre optic cable installation and maintenance technicians to verify system performance.The FOM is compatible with digital multimeters that have an mV d.c. function and a minimum 10MΩ input impedance. Single and duplex cable power lossTransmitted powerReceived powerFibre optic ...
Standard: IEC 1010-1, 600 V Cat. III, deg. ...
Description:
Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category. Current probes to measure low DC and AC currents.Easily adapted to all 19 mm standard spacing multimeters.Zero reset using a thumb wheel with disable feature.2 LEDs display overload (red LED) and the ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero control for nulling out jaw/sensor offsetSuperior noise immunity allows measurement ...