Aoip Instrumentation CALYS 75 Multi Function Calibrator

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Aoip Instrumentation Calibrator

The Aoip Instrumentation calibrator is a basic multifunction calibrator from the CALYS range. It is the perfect tool for advanced process maintenance and can be used on the test bench in many industries. It is suitable for both field and lab measurements. This product can simultaneously measure and generate over two isolated channels, various signals of temperature, resistance, process and frequency in one single instrument. This calibrator is fully protected by an antichoc rubber holster. It integrates "easy connect" terminals and a wide backlit display that makes it easy to use in low light conditions. This tool gathers all the signals in the manufacturing process: voltage, current, resistance, temperature using resistance probes and thermocouples, frequency, counting and measurement and simulation of dry contacts.

Features and Benefits

Simultaneous measures and simulates current range up to 50mA and voltage up to 50V
Double display (measurement/emission) screen with an indication of date/time and ambient temperature
'Easy connect", ultra-simple connection system, which accepts sockets, bare wires, terminals and banana plugs as well as flat thermocouple connectors
Graphic screen display with date and time, backlit with adjustable contrast
Selectable display resolution of 1, 2 or 3 digits after the decimal point
Display of measurement statistics for min, max and average values
Emission of ramps and increments to test the linearity and the range of transmitters, with retarder function
Integrated valve test
Scaling for quadratic and linear signals
Scaling for sensor correction
Compatible with HART transmitters
USB port for downloading software
Supplied with measurement wires, strap, stand for desktop use and fitted with a European plug
Relative pressure is 30bar and Absolute pressure is 1,000 bar


Process control automation


IP54 rated
21 CFR compliant

Attribute Value
Maximum Voltage Measurement 50V
Maximum Current Measurement 50mA
Port Connections USB, 3mm Wires
Battery Life 8 h
Battery Type Lithium-ion
Power Source Battery
Dimensions 210 x 110 x 50mm
Weight 900g
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Model Number p CALYS 75
2 In stock for delivery within 1 working days
Price Each
£ 2,450.50
(exc. VAT)
£ 2,940.60
(inc. VAT)
Per unit
1 +
Not available for guaranteed pre 9am/10am delivery
Related Products
This instrument allows the process engineer to simulate ...
This instrument allows the process engineer to simulate sensor conditions at the input of a transmitter while simultaneously measuring and storing the resulting signal output. Integral memory allows popular calibration procedures to be stored for transmitter testing in the field; later calibration reports can be produced. 0-24mA source & 0-300mA ...
DPI 620 GENII IS is Druck's next-generation instrument ...
DPI 620 GENII IS is Druck's next-generation instrument for calibration, configuration and maintenance of electrical, frequency, pressure and temperature devices in measurement and control applications. It can measure and source a wide range of parameters simultaneously including mA, mV, V, Ohms, frequency, RTDs, T/Cs, and HART/Fieldbus digital signals. It includes ...
Designed for process control instrumentation and general purpose ...
Designed for process control instrumentation and general purpose signal injection applications. Enables the user to test, calibrate and troubleshoot in a variety of environments. Features include. Sink, source and monitor modes for up to 20m AOverload protection for additional safety ABS case with clear 3 digit LCD display Battery condition ...
Take along the Fluke 725 Multifunction Process Calibrator, ...
Take along the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to calibrate transmitters? The 725's split display lets you view input ...