Martindale TEK 300 Multi Function Calibrator - UKAS Calibration

  • RS Stock No. 207-9266
  • Mfr. Part No. TEK300
  • Brand Martindale
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Process Control Current Calibrator Martindale TEK300

Designed for process control instrumentation and general purpose signal injection applications. Enables the user to test, calibrate and troubleshoot in a variety of environments. Features include

Sink, source and monitor modes for up to 20mA
Overload protection for additional safety
ABS case with clear 3 digit LCD display
Battery condition and error indication LEDs
Requires 2 x PP3 alkaline batteries
Test leads not included

Note

Capable of withstanding DC voltages up to 50V but can be damaged by AC inputs.

Martindale Direct Current Calibrator

The Martindale direct current calibrator is able to sink or source a current up to 20mA. It is intended for process control instrumentation and general purpose signal
injection applications. It has a monitor mode facility incorporated into the design, whereby the current (0mA to 20mA) in the process loop can be monitored and read directly from the digital display. This device is also fully protected against inadvertent misuse. This low-cost unit offers exceptional value for money means of delivering and measuring current ranging between 0mA and 20mA currents. This makes it ideal for cost-effective application in testing, calibrating and troubleshooting in a wide range of process control environments.

Features and Benefits


Sink, source and monitor modes ranging between 0mA and 20mA F. S. (+0.1%)
• DC/DC converter output of 28.5V (+0.1V)
• Resolution of 10μA
• Overload protection for additional safety
• ABS case with clear three digit LCD display
• Temperature drift 150ppm°C
• Linearity of 0.15%
• Output noise (typically) of 4mV p/p
• Battery condition and error indication LEDs
• Requires two PP3 alkaline batteries
• Capable of withstanding DC voltages up to 50V but can be damaged by AC input
• Operating temperature ranges between 0°C and 50°C

Applications


Process control automation
• Manufacturing
• Instrumentation

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specifications
Attribute Value
Maximum Current Measurement 20mA
Port Connections 4 mm Terminal
Calibrated UKAS
Battery Type PP3 9 V
Power Source Battery
Dimensions 180 x 100 x 144mm
Weight 380g
Height 44mm
Length 180mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Model Number p TEK 300
Width 100mm
15 In stock for delivery within 2 working days
Price Each
£ 374.00
(exc. VAT)
£ 448.80
(inc. VAT)
Units
Per unit
1 +
£374.00
Not available for guaranteed pre 9am/10am delivery
Related Products
This instrument allows the process engineer to simulate ...
Description:
This instrument allows the process engineer to simulate sensor conditions at the input of a transmitter while simultaneously measuring and storing the resulting signal output. Integral memory allows popular calibration procedures to be stored for transmitter testing in the field; later calibration reports can be produced. 0-24mA source & 0-300mA ...
DPI 620 GENII IS is Druck's next-generation instrument ...
Description:
DPI 620 GENII IS is Druck's next-generation instrument for calibration, configuration and maintenance of electrical, frequency, pressure and temperature devices in measurement and control applications. It can measure and source a wide range of parameters simultaneously including mA, mV, V, Ohms, frequency, RTDs, T/Cs, and HART/Fieldbus digital signals. It includes ...
A complete tool able to measure and generate ...
Description:
A complete tool able to measure and generate all manufacturing process signals: voltage, current, resistance, temperature by resistive probes and thermocouples, frequency, counting and measurement and simulation on dry contacts.Dual display continuously shows the measurement value, the emitted value, and indicates the date, time and external temperature.Drop-down menus and online ...
Fluke 725EX Multi-Function Process Calibrator ATEX with high ...
Description:
Fluke 725EX Multi-Function Process Calibrator ATEX with high performance. Small, streamlined shape makes it easy to carryEasy to read measure/source screen lets you view input and output simultaneouslyMeasure mA, volts, RTDs, thermocouples, frequency and ohms to test sensors and transmittersSource/simulate volts, mA, RTDs, thermocouples, frequency and ohms to calibrate transmittersMeasure/source ...