Schneider Electric Enclosure for use with LE1 Series

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Enclosure for GV2 Motor Starters

Supplied with waterproofing system.
Starter series GV2 - ME to be ordered separately.

Plastic/Metal Combination Housings

These motor starters are available in a selection of formats. All have removable steel base plates for rigidity when mounting to an uneven surface and ease of earthing and wiring and an impact resistant polycarbonate front cover which is adaptable to enable the fitting of other components without drilling. Switching category is AC3 and the enclosures are IP65 rated.

Specifications
Attribute Value
Accessory Type Enclosure
For Use With LE1 Series
7 in stock for FREE next working day delivery
8 available from Europe for delivery within 1 working day(s)
Price Each
£ 39.00
(exc. VAT)
£ 46.80
(inc. VAT)
Units
Per unit
1 - 4
£39.00
5 - 9
£37.45
10 +
£36.29
Related Products
Accepts one MPCB with auxiliary and voltage trip ...
Description:
Accepts one MPCB with auxiliary and voltage trip Option of black or red/yellow handleA Padlocking cover is needed for locking the handle of the enclosure in the’OFF’ position (see stock no. 237-0777).
Standards: BS5424 Part 1/IEC947, VDE 0660, NFC63 110. ...
Description:
Standards: BS5424 Part 1/IEC947, VDE 0660, NFC63 110. The GV2 series offers short circuit and overload protection in built within one device Can be used for disconnection Single phase sensitivity Built and tested to IEC947, EN60947Lockable in the off position Auxiliaries are available to signal all types of faults.
Enclosure rated at IP55Stop button can be fitted ...
Description:
Enclosure rated at IP55Stop button can be fitted to the front of the enclosure Use ’connector’ to connect manual motor starters to the contactors Adapter plate has 3 pole connection for mounting of a GV2 and an LC1 D09 to D25 contactor.
Enclosure rated at IP55Stop button can be fitted ...
Description:
Enclosure rated at IP55Stop button can be fitted to the front of the enclosure Use ’connector’ to connect manual motor starters to the contactors Adapter plate has 3 pole connection for mounting of a GV2 and an LC1 D09 to D25 contactor.