Power Integrations BRD1165C-TL Motor Driver IC 24-Pin, InSOP-C

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Highest Performance and Design Flexibility
Fully integrated half-bridge stage with up to 98% efficiency
Eliminates external heat sink at rated continuous RMS current
600 V N-channel power FREDFETs
Ultra-soft, fast recovery diode
Accurate instantaneous phase current information output (BRD126X)
Eliminates external sensing and amplification circuitry
Self-biased low-side and high-side drivers
Eliminates need for auxiliary power supply
Small footprint surface mount inSOP-24C package
Exposed pads enable heat sinking through PCB
Controlled FREDFET switching speed reduces EMI
Adjustable cycle-by-cycle current limit for both FREDFETs
Fail-safe operation

Internal dual level thermal overload protection
Self-configuring system level monitoring input
Four level DC bus undervoltage
DC bus overvoltage
System temperature
Adaptive dead time
Simultaneous conduction lockout protection
Applications
2- or 3-phase high-voltage PM and BLDC motor drives
Up to 300 W typical inverter output power
Appliances including dish washers and refrigerators
Condenser fans in high efficiency air conditioners

Specifications
Attribute Value
Configuration H Bridge
Maximum Output Current 3A
Mounting Type Surface Mount
Package Type InSOP-C
Pin Count 24
Typical Switching Frequency 20kHz
Series BRD
Product Height 1.45mm
Product Width 10.8mm
Dimensions 9.4 x 10.8 x 1.45mm
Length 9.4mm
Width 10.8mm
Maximum Operating Temperature +150 °C
Product Length 9.4mm
Height 1.45mm
Minimum Operating Temperature -40 °C
2000 In stock for FREE next working day delivery
Price Each (On a Reel of 2000)
£ 1.176
(exc. VAT)
£ 1.411
(inc. VAT)
Units
Per unit
Per Reel*
2000 +
£1.176
£2,352.00
*price indicative
Related Products
The ROHM 1-channel motor driver is an H-bridge ...
Description:
The ROHM 1-channel motor driver is an H-bridge HTSOP-J8 package up to 1A output current IC. This driver can facilitate low power consumption by direct PWM. There are built-in protection circuits in this IC. Each protection circuit operation contributes to set high reliability. This is a surface mount type IC ...
BD8263EFV-M is a 4.5-Channel system motor driver developed ...
Description:
BD8263EFV-M is a 4.5-Channel system motor driver developed for DC motors (Spindle motor, Sled motor, Loading motor) and coils (Tracking, Focus) drive for actuator. This IC can drive the motor and the coil of a CD/DVD drive. 4.5ch BTL Driver POWVCC for CHs 1 and 2 (DC motors) and VFCRNF,VMTKRNF ...
The BP5293-12 series is one packaged 3terminals Buck ...
Description:
The BP5293-12 series is one packaged 3terminals Buck type DC/DC Converter built-in all parts of DC/DC converter. High efficiency compared with 3 terminals regulator, and not necessary to heat sink. It’s able to rearrange without redesign PCB, because of pin compatible. The built in input/output capacitors and coil is contribute ...
The ROHM 3-pin motor driver is a DC ...
Description:
The ROHM 3-pin motor driver is a DC motor SIP package up to 1A output current IC. This 3-terminal, 1-channel regulator does not require a heat sink, eliminating the need for external parts. Because of its integrated design, it requires less board space and fewer components. Supplied with 30VDC maximum ...