ROHM BD65491FV-E2, Brushed Motor Driver IC 16-Pin, SSOP

  • RS Stock No. 171-4073
  • Mfr. Part No. BD65491FV-E2
  • Brand ROHM
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The BD65491FV motor driver provides 1 Full-ON Drive H-bridge channel, while BD65492MUV provides 2 Full-ON Drive H-bridge channels. These ICs feature wide range operating from 1.8V and low power consumption by high switching speed in a compact surface mount package.

Low ON-Resistance Power DMOS output: Full-ON Drive block with 0.35Ω Typ.
Range of motor power supply voltage: 1.8V to 16.0V
Charge pump-less type with p-channel DMOS for the upper side transistor
The highest performance in regard to switching speed, and 4-values selection
Turn On Time: 150ns & Turn Off Time: 50ns
Drive mode switch function
Maximum output current for H-bridge: DC maximum 1.2A, Peak maximum 4.0A
Control input pins corresponding to the signal of 1.8V system
Built-in UVLO (Under Voltage Lockout Protection) function & TSD (Thermal Shut Down) circuit
Standby current: 0μA Typ.
Applications:
Coin Processing Machines
Digital Still Camera
Machine Vision Camera for Industrial

Specifications
Attribute Value
Motor Type Brushed DC
Output Configuration Half Bridge
Configuration Half Bridge
Maximum Output Current 4A
Maximum Supply Voltage 5.5 (Power) V, 16 (Motor) V
Mounting Type Surface Mount
Package Type SSOP
Maximum Operating Supply Voltage 5.5 (Power) V, 16 (Motor) V
Pin Count 16
Minimum Operating Supply Voltage 1.8 (Motor) V, 2.5 (Power) V
Typical Switching Frequency 500 (Maximum)kHz
Height 1.15mm
Product Length 5mm
Maximum Operating Temperature +85 °C
Length 5mm
Dimensions 5 x 4.4 x 1.15mm
Product Width 4.4mm
Width 4.4mm
Minimum Operating Temperature -30 °C
Product Height 1.15mm
Available to back order for despatch 30/04/2020, delivery within 5 working days
Price Each (On a Reel of 2500)
£ 1.881
(exc. VAT)
£ 2.257
(inc. VAT)
Units
Per unit
Per Reel*
2500 +
£1.881
£4,702.50
*price indicative
Not available for guaranteed pre 9am/10am delivery
Related Products
BU33UV7NUX is a synchronous buck-boost convertor with low ...
Description:
BU33UV7NUX is a synchronous buck-boost convertor with low power consumption and provides a power supply for products powered by either two-cell alkaline/ Ni Cd/ Ni MH or one-cell Li-ion or Li-polymer battery. Output currents can go as high as 500mA while using two alkaline, and discharge it down to 1.8 ...
This is the product guarantees long time support ...
Description:
This is the product guarantees long time support in Industrial market. The BD9G102G-LB is a 42V, 0.5A non-synchronous buck converter with integrated internal high-side 42V Power MOSFET. Operating frequency is 1.0MHz fixed by inner circuit. The components of phase compensation are built in. Additional protection features are included such as ...
BU18SD5WG is high-performance CMOS LDO regulators with output ...
Description:
BU18SD5WG is high-performance CMOS LDO regulators with output current ability of up to 500mA. this device has excellent noise and load response characteristics despite of its low circuit current consumption of 33μA. This is most appropriate for various applications such as power supplies for logic IC, RF, and camera modules. ...
Description:
The Low dropout or LDO is a linear voltage regulator. We have a wide range of linear regulators. The LDO regulator can operate with a small input–output differential voltage. LDO voltage regulators may offer fast transient response, wide input voltage range, low quiescent current and low noise with high PSRR. ...