ROHM BD65496MUV-E2, Brushed Motor Driver IC 24-Pin, VQFN

  • RS Stock No. 171-2073
  • Mfr. Part No. BD65496MUV-E2
  • Brand ROHM
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The BD65496MUV motor driver provides 1 Full-On Driver H-Bridge channel. This driver features wide range operating from 1.8V and low power consumption by fast switching speed in a compact surface mount package.

Low ON-Resistance Power DMOS output: upper & lower total 0.35Ω (Typ.)
Range of motor power supply voltage: 1.8V to 16.0V
Charge pump-less type with p-channel DMOS for the upper side transistor
H-Bridge output current (DC): 1.2A
H-Bridge output current (Peak2): 5.0A
The highest performance in switching speed: 150ns(Turn on time), 50ns(Turn off time)
Variable switching speed 4-values
Drive mode switch function (EN/IN & IN/IN)
Control input pins fit the signal of 1.8V system
With built-in Under Voltage Locked Out protection & Thermal Shut Down circuit
Stand-by current: 0μA (Typ.)
Applications:
Coin Processing Machines
Machine Vision Camera for Industrial

Specifications
Attribute Value
Motor Type Brushed DC
Configuration Half Bridge
Output Configuration Half Bridge
Maximum Output Current 1.2A
Maximum Supply Voltage 5.5 (Power) V, 16 (Motor) V
Mounting Type Surface Mount
Package Type VQFN
Pin Count 24
Maximum Operating Supply Voltage 5.5 (Power) V, 16 (Motor) V
Minimum Operating Supply Voltage 1.8 (Motor) V, 2.5 (Power) V
Typical Switching Frequency 500 (Maximum)kHz
Maximum Operating Temperature +85 °C
Product Length 4mm
Length 4mm
Dimensions 4 x 4 x 0.98mm
Product Width 4mm
Width 4mm
Height 0.98mm
Minimum Operating Temperature -30 °C
Product Height 0.98mm
Available to back order for despatch 10/03/2020, delivery within 5 working days
Price Each (On a Reel of 2500)
£ 1.226
(exc. VAT)
£ 1.471
(inc. VAT)
Units
Per unit
Per Reel*
2500 +
£1.226
£3,065.00
*price indicative
Not available for guaranteed pre 9am/10am delivery
Related Products
Infineon offer a variety of drivers that offer ...
Description:
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side ...
The reversible motor driver for output 1.0A for ...
Description:
The reversible motor driver for output 1.0A for 1 motor can set the output modes to four modes, normal, reverse, stop(idling), and braking in accordance with logic input (2 inputs). Built-in surge absorption diodeBy built-in power save circuit, current consumption when a motor stops (idles) can be suppressedOutput voltage can ...
BU24020GU is the system Lens Driver corresponding to ...
Description:
BU24020GU is the system Lens Driver corresponding to the Microstep driving, making it possible to configure the sophisticated, high precision and low noise lens driversystem. Microstep controller is incorporated into IC,making it possible to cut down CPU power. Built-in 4 channels Driver block. 1-4ch: Voltage control type H-bridge (Adaptable to ...
A3950SLPTR-T | Allegro Microsystems A3950SLPTR-T, Brushed DC Motor ...
Description:
A3950SLPTR-T | Allegro Microsystems A3950SLPTR-T, Brushed DC Motor Driver, 36 V 2.8A 16-Pin, TSSOP