Magnatec L298N, Brushed Motor Driver IC, 46 V 4A 15-Pin, MULTIWATT V

  • RS Stock No. 165-8002
  • Mfr. Part No. L298N
  • Brand Magnatec
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

L298 Dual Full Bridge Motor Driver

ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.

Features

  • Operating supply voltage up to 46 V

  • Total DC current of up to 4 A

  • Low saturation voltage

  • Over-temperature protection

  • Logical "0" input voltage up to 1.5 V (high noise immunity)

What are Motor Driver IC's?

Motor Driver ICs are current amplifiers and are an essential component of motor interfacing. The motor driver integrated circuit chip acts as the interface between a microprocessor or microcontroller, and a motor. As microprocessors tend to operate at lower currents, and motors at higher, motor driver ICs are needed to supply current to the motor as needed. The RS Components range of Motor Driver ICs includes models from leading brands, in various types and configurations to support your design needs.

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 4A
Maximum Collector Emitter Voltage 46 V
Mounting Type Through Hole
Package Type MULTIWATT V
Maximum Operating Supply Voltage 46 V
Pin Count 15
Minimum Operating Supply Voltage 4.8 V
Maximum Operating Temperature +130 °C
Minimum Operating Temperature -25 °C
Length 19.6mm
Height 10.7mm
Width 5mm
Dimensions 19.6 x 5 x 10.7mm
25 In stock - FREE next working day delivery available
Price Each (In a Tube of 25)
£ 3.156
(exc. VAT)
£ 3.787
(inc. VAT)
Units
Per unit
Per Tube*
25 - 25
£3.156
£78.90
50 - 75
£3.035
£75.875
100 - 225
£2.869
£71.725
250 +
£2.717
£67.925
*price indicative
Related Products
The high-performance and high-density single-phase synchronous PWM step-down ...
Description:
The high-performance and high-density single-phase synchronous PWM step-down controllers are the ideal solution for computing, networking, DC-DC modules and telecommunication equipment.
Infineon offer a variety of drivers that offer ...
Description:
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, Trilith IC, Novalith IC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The Trilith IC integrates two high-side ...
Accurate position control High efficiency Low-Power consumption Applications ...
Description:
Accurate position control High efficiency Low-Power consumption Applications in automotive, vending machines, ATM machines, paper feed in printers, scanners, security cameras.
This IC converts the input clock signal by ...
Description:
This IC converts the input clock signal by 12/15 ratio and output it. It is the best when need to output the FG signal equivalent to the 8-pole motor when using the 10-pole motor with the FG signal generated from the Hall sensor signals. 5V Power Supply Conversion Ratio, 15:12Input ...