GertBoard Gertbot Gertbot Robotic Motor Driver Stepper Add On Board

  • RS Stock No. 848-6806
  • Mfr. Part No. Gertbot
  • Brand GertBoard
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Gertbot Motor Control Board for Raspberry Pi

The Gertbot is an add-on board made especially for, and compatible with all versions of the Raspberry Pi. By plugging the Gertbot to your Pi GPIO header, you are able to control and drive various motors such as stepper and brushed motors. The Gertbot can also be used as a standalone board and can be controlled from any computer via a UART serial port.

Features & Benefits of the Gertbot
•64 MHz ARM Cortex-M3 processor
•Can drive 30 V and 2.5 A
•Easy to set up
•High-level commands make it easy to control
•Capacity to plug in up to 4 more boards
•Outputs are short circuit and thermal protected
•The board can be controlled without programming

Specifications
Attribute Value
Kit Name Gertbot Robotic Motor Driver
Kit Classification Add On Board
Motor Type Stepper
Available to back order for despatch 16/03/2020
Price Each
£ 40.97
(exc. VAT)
£ 49.16
(inc. VAT)
Units
Per unit
1 +
£40.97
Related Products
The LB1838M is 2-channel low-voltage, low saturation voltage ...
Description:
The LB1838M is 2-channel low-voltage, low saturation voltage type bidirectional motor driver IC that is optimal for use as 2-phase stepping motor driver in printers, floppy disk drives, and cameras and other portable equipment. The output circuits are of the bipolar type, with pnp transistors in the upper side and ...
The LB1938FA is an H-bridge motor driver that ...
Description:
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an ultra-miniature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two input signals, and is an optimal DC motor driver for notebook personal computers, digital cameras, cell phones, and ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby mode The compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at ...
The LB1939T is a constant voltage driver for ...
Description:
The LB1939T is a constant voltage driver for single stepping motor. It is optimal for motor drive in portable system products. (Battery drive available ). Low voltage drive Dual power supply operation Vs=1.6V to 7.5V VDD=1.9V to 6.5VSingle power supply operation Vs=VDD=1.9V to 7.5VLow saturation voltage Vosat=0.3V at Io=200m ASupports ...