ON Semiconductor LB1909MCGEVB Stepper Motor Driver IC Evaluation Board Stepper Evaluation Board for LB1909MC-BH for Low

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products.

Current consumption 0 in standby mode
The compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8A
BIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at Io=400mA)

Specifications
Attribute Value
Kit Name Stepper Motor Driver IC Evaluation Board
Kit Classification Evaluation Board
For Use With Low Saturation Voltage Stepper Motor Drive
Motor Type Stepper
Featured Device LB1909MC-BH
Available to back order for despatch 07/07/2020
Price Each
£ 49.64
(exc. VAT)
£ 59.57
(inc. VAT)
Units
Per unit
1 +
£49.64
Related Products
The STEVAL-SPIN3201 board is a three-phase Brushless DC ...
Description:
The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing. • 48MHz STM32 Cortex-M0 core MCU with 32KB Flash memory, 4KB SRAM • ...
The STEVAL-IPM08B compact motor drive power board is ...
Description:
The STEVAL-IPM08B compact motor drive power board is based on SLLIMM™ (small low-loss intelligent molded module) 2nd series module ( STGIB8CH60TS-L). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such as power white goods, air conditioning, compressors, power fans, high-end ...
The NV705143R1DBGEVB is a form factor Reference Design ...
Description:
The NV705143R1DBGEVB is a form factor Reference Design for driving bipolar stepper motors. The reference design can be interfaced via I/O pins and the SPI bus to an external microcontroller. In conjunction with the NCV7052x GEVK evaluation kit it forms a complete solution turning high level commands from a SPI ...
The STEVAL-FCU001V1 is designed to support quadcopter drone ...
Description:
The STEVAL-FCU001V1 is designed to support quadcopter drone designers. A complete sample FW project allows the designer to begin flying small and medium size quadcopters (with brushed or brushless DC motors) immediately and evaluate the performance of the IMU sensors under real flight conditions. The FCU can be controlled by ...