ON Semiconductor LV8741VGEVB H-Bridge Driver IC Evaluation Board Stepper Evaluation Board for LV8741V-TLM-E for

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The LV8741V is a 2-channel H-bridge driver IC that can switch a stepping motor driver, which is capable of micro-step drive and supports Full-step, Half-step (full torque), Half-step, and Quarter-step resolution, and two channels of a brushed motor driver, which supports forward, reverse, brake, and standby of a motor.

Single-channel PWM current control stepping motor driver (selectable with DC motor driver channel 2) incorporated
BiCDMOS process IC
Micro step mode can be set to full-step, half-step (full torque), half-step, and quarter-step mode
Excitation step proceeds only by step signal input
Motor holding current selectable in four steps
I/O max = 1.5A
Output-stage push-pull structure enabling high-speed operation
Output short-circuit protection circuit (selectable from latch-type or auto reset-type) incorporated
Thermal shutdown circuit and power supply monitor circuit incorporated
Supports control power supply VCC = 3.3V

Specifications
Attribute Value
Kit Name H-Bridge Driver IC Evaluation Board
Kit Classification Evaluation Board
For Use With Brushed Motor Drive, Stepping Motor Drive, 2-Channel H Bridge Drive
Motor Type Stepper
Featured Device LV8741V-TLM-E
8 In stock for FREE next working day delivery
Price Each
£ 32.21
(exc. VAT)
£ 38.65
(inc. VAT)
Units
Per unit
1 +
£32.21
Related Products
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control applications like electric cars, boats and UAV drones. • 72MHz ...
The STEVAL-SPIN3201 board is a three-phase Brushless DC ...
Description:
The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing. • 48MHz STM32 Cortex-M0 core MCU with 32KB Flash memory, 4KB SRAM • ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • ...
The NV705143R1DBGEVB is a form factor Reference Design ...
Description:
The NV705143R1DBGEVB is a form factor Reference Design for driving bipolar stepper motors. The reference design can be interfaced via I/O pins and the SPI bus to an external microcontroller. In conjunction with the NCV7052xGEVK evaluation kit it forms a complete solution turning high level commands from a SPI node ...