Adafruit 2305 Controller Board Controller Board for DRV2605L for Haptic Motor

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adafruit DRV2605L Haptic Motor Controller Board

This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.

The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.

Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.

Board dimensions: 18 x 17 x 2 mm (0.7" x 0.7" x 0.1")
1.0 g

Motor Controllers & Drivers

Specifications
Attribute Value
Kit Name Controller Board
Kit Classification Controller Board
For Use With Haptic Motor
Featured Device DRV2605L
Available to back order for despatch 19/05/2020
Price Each
£ 5.77
(exc. VAT)
£ 6.92
(inc. VAT)
Units
Per unit
1 - 4
£5.77
5 - 9
£5.60
10 +
£5.48
Related Products
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control applications like electric cars, boats and UAV drones. • 72MHz ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC ...
Description:
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • Output ...
The X-NUCLEO-IHM13A1 is a low-voltage brushed DC motor ...
Description:
The X-NUCLEO-IHM13A1 is a low-voltage brushed DC motor driver expansion board based on the STSPIN250 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • Output current: ...