Nexperia 74LVC1G123DP,125 Monostable Multivibrator 32mA, 8-Pin TSSOP

  • RS Stock No. 170-5405
  • Mfr. Part No. 74LVC1G123DP,125
  • Brand Nexperia
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

The 74LVC1G123 is a single retriggerable monostable multivibrator with Schmitt trigger inputs. Output pulse width is controlled by three methods. The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (A) or the active HIGH-going edge input (B). By repeating this process, the output pulse period (Q = HIGH) can be made as long as desired. Alternatively an output delay can be terminated at any time by a LOW-going edge on input CLR, which also inhibits the triggering.

Wide supply voltage range
High noise immunity
CMOS low power consumption
DC triggered from active HIGH or active LOW inputs
Retriggerable for very long pulses up to 100 % duty factor
Direct reset terminates output pulse
Schmitt trigger on all inputs
Power-on-reset on outputs
Inputs accept voltages up to 5.5 V

Attribute Value
Logic Family 74LVC
Logic Function Monostable Multivibrator
Number of Elements per Chip 1
Maximum High Level Output Current -32mA
Maximum Low Level Output Current 32mA
Minimum Pulse Width 2.5 ns
Maximum Propagation Delay Time @ Maximum CL 20.3 ns @ 50 pF
Maximum Quiescent Current 20µA
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 8
Dimensions 3.1 x 3.1 x 0.95mm
Height 0.95mm
Length 3.1mm
Minimum Operating Supply Voltage 1.65 V
Minimum Operating Temperature -40 °C
Propagation Delay Test Condition 50pF
Maximum Operating Temperature +125 °C
Maximum Operating Supply Voltage 5.5 V
Width 3.1mm
2475 In stock - FREE next working day delivery available
Price Each (In a Pack of 25)
£ 0.375
(exc. VAT)
£ 0.45
(inc. VAT)
Per unit
Per Pack*
25 - 225
250 - 600
625 - 1225
1250 - 2475
2500 +
*price indicative
Packaging Options:
Related Products
The ST3232E is a 3 V powered EIA/TIA-232 ...
The ST3232E is a 3 V powered EIA/TIA-232 and V.28/V.24 communication interfaces with low power requirements, high data-rate capabilities and enhanced electrostatic discharge (ESD)protection. The ST3232E has a proprietary low-dropout transmitter output stage providing true RS-232 performance from 3 to 5 V supplies with a dual charge pump. The charge ...
The NL37W range, from ON Semiconductors, consists of ...
The NL37W range, from ON Semiconductors, consists of inverters and buffers. Designed for 1.65 V to 5.5 V VCC operation Over voltage tolerant (OVT) inputs and outputs LVTTL compatible − interface capability with 5 V TTL logic with VCC = 3 VLVCMOS compatible24 mA balanced output sink and source capability ...
CMOS Logic gates with LVTTL compatible inputs and ...
CMOS Logic gates with LVTTL compatible inputs and outputs, offering higher speed and greater drive capability than 74LCX devices. Wide 1.65 to 5.5V operating supply LVCMOS Compatible24mA source/sink capacity at 3.0V. NL27W Series, ON Semiconductor. NL Series Logic Family, ON Semiconductor.
The 74VHC125FT,74VHC126FT are high speed CMOS QUAD BUS ...
The 74VHC125FT,74VHC126FT are high speed CMOS QUAD BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Shottky TTL while maintaining the CMOS low power dissipation. The 74VHC125FT requires the 3-state control input G to be set high to place the output ...