AverLogic AL460A-7-EVB-A0, FIFO Evaluation Board for AL460A

  • RS Stock No. 749-6635
  • Mfr. Part No. AL460A-7-EVB-A0
  • Brand AverLogic
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

AL460A HD-FIFO Evaluation Board, AverLogic

The AL460A HD-FIFO Module is designed for evaluating the AL460A HD-FIFO integrated chip. It has two embedded AL460A-7-PBF or AL460A-13-PBF chips operating in parallel, expanding the bus width to 32-bits. Control signals and data bus signals are available on two 50-pin connectors; one connector is reserved for write controls and the input data bus; the other one is for read controls and the output data bus.
The AL460 chip is designed with a straight forward bus interface, reducing implementation and debugging efforts, and helping customers develop faster and more efficiently. This board is especially designed and optimized to be easily integrated as an add-on module on existing systems, significantly reducing interface engineering issues commonly found in retrofit efforts.

256Mbit density, 8M x 32-bit FIFO memory
Maximum 150MHz (AL460A-13-EVB-A0), 75MHz (AL460A-7-EVB-A0) 32-bit synchronous sequential read/write operations
Maximum 4.8Gbps throughput
3.3V power supply
Programmable I/O control
Supports double buffer mode (4M x32-bit upper and lower frames access)
Selectable Polarity control

Specifications
Attribute Value
Memory Technology FIFO
Kit Classification Evaluation Board
Featured Device AL460A
Available to back order for despatch 07/02/2020
Price Each
£ 138.45
(exc. VAT)
£ 166.14
(inc. VAT)
Units
Per unit
1 - 4
£138.45
5 - 9
£117.16
10 - 24
£101.53
25 - 49
£93.41
50 +
£88.41
Related Products
Silicon Lab evaluation board Si5338-EVB will assess all ...
Description:
Silicon Lab evaluation board Si5338-EVB will assess all of the following Si5330/34/35/38 series of any frequency and any output quad clock generator and buffers. USB-poweredClockBuilder™ desktop configuration softwareGUI programmable supply voltages, VDDO 1.8, 2.5 and 3.3 VGUI controlled current, voltage and power measurementsLab equipment Test pointsISO 9001, ISO 14001and ISO/TS ...
The Silicon Laboratories Si5XX-PROG-EVB circuit board evaluates any ...
Description:
The Silicon Laboratories Si5XX-PROG-EVB circuit board evaluates any frequency I2C programmable crystal oscillators/Voltage control crystal oscillators; Si514; Si570; Si571; Si598 and Si599. Kit contains the hardware and software and EVB driver (USBXpress®)Supported frequency: 100 kHz to 1417MHzAdjusting VDD Voltage regulator 1.8, 2.5 or 3.3 VI2C communicationVoltage control (VC) input port ...
The FUSB303 device is a fully autonomous USB ...
Description:
The FUSB303 device is a fully autonomous USB Type-C controller optimized for 15W or less applications. The FUSB303 offers CC logic detection for Source Port role, Sink Port role, DRP Port role, and accessory detection support, as well as Dead Battery support as defined in USB-C specifications. The FUSB303 features ...
The STEVAL-SPIN3202 three-phase brushless DC motor driver board ...
Description:
The STEVAL-SPIN3202 three-phase brushless DC motor driver board is an evaluation board based on the STSPIN32F0A and STD140N6F7 MOSFETs. It provides an affordable and easy-to-use solution for the implementation of low voltage motor driving applications. The board is designed for sensored or sensorless vector control - FOC and six-step algorithms ...