Double Sided DIN 41612 Matrix Board FR4 with 1.02mm Holes 2.54 x 2.54mm Pitch, 220 x 100mm

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Boards with Square Pads and Foil Laminate Holes

The foil laminate allows wires to be placed in the same holes as the tails of the components, enabling very secure soldered connections to be made.
A DIN 41612 connector with 96 / 96 contacts is fitted at each end.
Supply rails are provided along the length of the board.
An earth plane ensures maximum shielding on the component side.

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specifications
Attribute Value
Number of Sides 2
Hole Pitch 2.54 x 2.54mm
Dimensions 220 x 100mm
Length 220mm
Width 100mm
Base Material Epoxy Glass Fabric Laminate
Hole Diameter 1.02mm
FR Material Grade FR4
Copper Thickness 35µm
Connection DIN 41612
Available to back order for despatch 29/11/2019
Price Each
£ 52.92
(exc. VAT)
£ 63.50
(inc. VAT)
Units
Per unit
1 - 4
£52.92
5 - 9
£50.80
10 - 39
£48.69
40 +
£46.57
Related Products
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either ...
Completely drilled boards, designed for the development of ...
Description:
Completely drilled boards, designed for the development of prototypes of analogue circuits.Thanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to be fitted.
Quadratic soldering islands reduce risk of lifting during ...
Description:
Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth screen on the component side provides maximum shielding. Plug connectors compliant with DIN 41612, types B and C up to 96 contacts, can be mounted on both sides of ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either ...