Single Sided DIN 41612 Eurocard FR4 with 1.02mm Holes 2.54 x 2.54mm Pitch, 233.4 x 220 x 1.6mm

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Single-Sided Microboards with Foil Laminate Holes

Development boards
Eurocard PTH microboard pcb made from copper laminated FR4 material
Medium packing density
Total flexibility using hard wire or wire wrapping assembly
Two Vcc power rails and 0V ground plane
Dimensionally compatible with IEC 297
DIN 41612 connector pattern front and rear
Printed grid pattern for easy reference
Coated with solder resist to reduce the risk of solder bridging
UL94 V0

DIN Type Stripboards

Suitable for use with the KM6-II eurocard sub-rack systems

The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.


Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

Attribute Value
Number of Sides 1
Hole Pitch 2.54 x 2.54mm
Dimensions 233.4 x 220 x 1.6mm
Length 233.4mm
Width 220mm
Thickness 1.6mm
Base Material Epoxy Glass Fabric Laminate
Hole Diameter 1.02mm
FR Material Grade FR4
Connection DIN 41612
1 In stock for FREE next working day delivery
Price Each
£ 84.41
(exc. VAT)
£ 101.29
(inc. VAT)
Per unit
1 - 4
5 - 9
10 - 39
40 +
Related Products
This allows reliable HF, digital and analogue circuits ...
This allows reliable HF, digital and analogue circuits to be set up. The component side is fully laminated, only the holes are etched. The second side is designed with soldering islands. For DIN 41612 connectors, type B and C, 64-pole.
Completely drilled boards, designed for the development of ...
Completely drilled boards, designed for the development of prototypes of analogue circuits.Thanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to be fitted.
Quadratic soldering islands reduce risk of lifting during ...
Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth screen on the component side provides maximum shielding. Plug connectors compliant with DIN 41612, types B and C up to 96 contacts, can be mounted on both sides of ...
Matrix boards with 1mm holes on a 2.54mm ...
Matrix boards with 1mm holes on a 2.54mm pitch. The foil laminate allows wires to be placed in the same holes as the tails of the components, enabling very secure soldered connections to be made.A DIN 41612 connector with 96 / 96 contacts is fitted at each end.Supply rails are ...