RawlPlug Steel Masonry Anchor M12, fixing hole diameter 20mm, length 145mm

  • RS Stock No. 681-6744
  • Mfr. Part No. R-RBL-12HW
  • Brand RawlPlug
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PL
Product Details

RawlPlug R-RBL-H Rawlbolt™ All Purpose Shield Anchor Plug Hook Bolt.

From RawlPlug this is the R-RBL-H Rawlbolt shield anchor Hook bolt plug, one of RawlPlug’s most sought after all purpose expanding shield anchors. The R-RBL-H Rawlbolt is the Hook bolt version, designed to provide you with maximum performance. The expanding sleeve is made up of 3-pieces providing excellent expansion and optimum load safety for any material.

Features and Benefits.

  • R-RBL-H Rawlbolt Expanding Hook Bolt Plug.

  • Shield anchor.

  • Expanding.

  • Excellent durability.

  • 3-Piece expanding sleeve.

  • Optimal load and safety capacity.

  • Used in any material.

  • Suitable for permanent and temporary anchoring.
  • Safety Note: Hook Rawlbolts and not suitable for all Arrest Systems or shock loading.

Typical Shield Anchor Hook Bolt Fixings Applications.

  • Supporting ladder restraints.

  • Supporting Guy ropes, stays and cables

Material the R-RBL-H Rawlbolt Hook Bolts are Compatible with?

Approved for use in:

  • Cracked concrete C20/25-C50/60.

  • Non-Cracked concrete C20/25-C50/60.

  • Unreinforced concrete.

  • Reinforced concrete.

  • Solid clay brick ≥ 20MPa.

  • Hollow lightweight concrete block LAC 5 ≥ 5MPa.

  • Hollow sand lime brick ≥ 15MPa.

  • Concrete hollow floor block (Teriva).

  • Hollow core slab C20/25.

  • Hollow core slab C30/37-C50/60.

R-RBL-H Rawlbolt Expansion Hook and Eye Bolts Fixings Available?

  • Stock number 528227, M6, Shield anchor Eye Bolt, 12 mm x 83 mm.

  • Stock number 528205, M6, Shield anchor Hook Bolt, 12 mm x 83 mm.

  • Stock number 528233, M8, Shield anchor Eye Bolt, 14 mm x 98 mm.

  • Stock number 528211, M8, Shield anchor Hook Bolt, 14 mm x 98 mm.

  • Stock number 6816738, M10, Shield anchor Eye Bolt, 16 mm x 120 mm.

  • Stock number 6816735, M10, Shield anchor Hook Bolt, 16 mm x 120 mm.

  • Stock number 6816731, M12, Shield anchor Eye Bolt, 20 mm x 145 mm.

  • Stock number 6816744, M12, Shield anchor Hook Bolt, 20 mm x 145 mm.

How to use the R-RBL-H Rawlbolt Expansion Hook / Eye Bolts?

  • Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.

  • Special note: If fixing into brickwork avoid all mortar joint areas.

  • Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).

  • Insert the anchor into the pre-drilled hole till it is flush with the surface then position the Hook as required.

  • Tighten the fixing carefully, only to the recommended torque using the Hex but and not the Hook.

Attribute Value
Thread Size M12
Type Shield Anchor Hook Bolt
Length 145mm
Fixing Hole Diameter 20mm
Material Steel
Hook Inside Diameter 16mm
Sorry, we couldn't check our stock levels right now. Please try refreshing the page.
Price Each (In a Pack of 5)
Was £3.93
£ 3.144
(exc. VAT)
£ 3.773
(inc. VAT)
Per unit
Per Pack*
5 +
*price indicative
Not available for guaranteed pre 9am/10am delivery
Related Products
Glass capsule anchor used with spin-in studs to ...
Glass capsule anchor used with spin-in studs to provide an expansion free anchorage in concrete, which can be used at close spacing and edge distances. Capsule can be installed in rotary percussion or diamond drilled holes Typical applications include fixing of pipework brackets, machinery, lighting columns, CCTV cameras and racking ...
Suitable for most applications. 3 popular sizes of ...
Suitable for most applications. 3 popular sizes of Rawl Uno™ wall plugs Plastic plasterboard screwplugs250 twin threaded cross-recess countersunk head zinc plated and passivated steel woodscrews Masonry drills supplied to suit fixings Supplied in polypropylene storage box with carrying handle and 10 removable storage trays. Masonry Fixing Kit.
From Rawl Plug this is the Rawlnut Flex ...
From Rawl Plug this is the Rawlnut Flex plug which includes a threaded screw fitting. The flexi plug is made from synthetic rubber with a bonded metal insert plus the complete fixing is vibration and corrosion resistant. The flange of the rubber-plug fixing sits flush at the surface of the ...
The Rawl Fixings is an M12 thread size, ...
The Rawl Fixings is an M12 thread size, 13mm hole diameter all-purpose expanding shield anchor loose bolt. It is designed for cracked and non-cracked concrete with a length of 105mm. • Bolt Lengths suitable for fixture thicknesses of up to 25mm• Excellent tolerance to variation in hole size• Ferrule marked ...