Digitron 2000P Differential Digital Pressure Meter With 2 Pressure Port/s, Max Pressure Measurement 7bar - RSCAL

  • RS Stock No. 315-7317
  • Mfr. Part No. 2023P7
  • Brand Digitron
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Digitron 2023P, 0-7 bar, Differential Manometer

The Digitron 2023P handheld differential manometer takes pressure measurements over a wide range of pressures. It is of robust design, to IP67 with hose connected, and operates between -10 and +50 °C. Features include a backlit display, reinforced silicone keypad and separate battery compartment. The 2023P filters low-level fluctuations to provide a stable display when measuring unsteady pressure levels.

Accuracy 0.15% rdg + 0.1fs + digit (+20 to +30 °C), 0.15% rdg + 0.15% fs digit (elsewhere)
2 inputs via 1/8 BSP (4mm id, 6mm od hose)
Preset engineering units -mbar, Pa, inH2O, mH2O, inHg, mHg, kPa, PSI
Min/Max recorder and range lock
Dimensions 155 x 67 x 40 mm
Weight 180g


1. Requires 2xAA batteries (please see 744-2199 ).
2. Particular care should be taken not to over pressure this device as this may rupture the sensor membrane. This is not covered by the manufacturers warranty.
3. The differential / gauge instruments will only measure positive pressures i.e. positive pressure applied to the positive port, or negative pressure applied to the negative port.
4. Not suitable for use with corrosive substances or cyclic hydrocarbons, e.g. motor oil, transmission fluid and freon. To use these instruments with these fluid components, isolation must be provided in the form of a buffer, such as mineral oil or dry air.

Supplied with

Instruction manual

Digitron 2000P Series - Manometers

Hand-held manometers series. Features found in the range include:

Robust design. IP67 with hose connected, operates between -10 and +50°C, backlit 12.7mm display, reinforced silicone key pad and separate battery compartment
Accuracy: 0.15% rdg + 0.1fs +digit (+20 to +30°C); 0.15% rdg + 0.15% fs digit (elsewhere)
Connection: 2 inputs via 1/8 BSP (4mm id, 6mm od hose)
Zeroing absolute user input of local barometric conditions for additional accuracy
Preset engineering units - mbar, Pa, inH²O, mH²O, inHg, mHg, kPa, PSI
Min/Max & Average recording, range lock & selectable auto off
Smoothing. Filters low level fluctuations to provide a stable display when measuring unsteady pressure levels
Automatic leak testing. Instrument measures pressure leakage from a system over a user specified test duration time. At the end of the test time a Pass/Fail message is displayed and logged to memory
Long battery life. Typically 200 hours (requires 2 x AA batteries, stock no 591-225)
Dimensions: 155 x 67 x 40mm, weight 180g
All instruments are supplied with instruction manual.

Model 202xP and 208xP additional features:

7 pre-set engineering units
Range lock, Min / Max recorder

Model 208xP additional features:

Automatic leak testing
250 memory logging on demand or at preset intervals
Min/Max and averaging recorder
4 digit reference coding of logged data
Cal function zero
Infra red serial interface to connect via DigiLink interface direct to a serial printer or PC
User-definable scaling

Attribute Value
Best Accuracy ±0.15% + 0.0105 bar + 1 Digit
Calibrated RSCAL
Number of Pressure Ports 2
Maximum Pressure Measurement 7bar
Minimum Pressure Measurement 0bar
Pressure Port Type Differential
Minimum/Maximum Recordings Yes
IP Rating IP67
Battery Type AA
Display Type LCD
Overpressure Maximum 10bar
Weight 180g
Maximum Operating Temperature +50°C
Model Number p 2000P
Width 67mm
Minimum Operating Temperature -10°C
Dimensions 155 x 67 x 40mm
Height 40mm
Length 155mm
Available to back order for despatch 04/06/2020
Price Each
£ 343.93
(exc. VAT)
£ 412.72
(inc. VAT)
Per unit
1 +
Not available for guaranteed pre 9am/10am delivery
Related Products
The Fluke 922 kit combines air pressure, air ...
The Fluke 922 kit combines air pressure, air flow, and air velocity measurements in a single, rugged meter. The Fluke 922 can be used to ensure proper air flow balance and maintain a comfortable environment; measure pressure drops across filters and coils; match ventilation to occupant loads; monitor indoor vs. ...
Dwyer Instruments 475 series Mark III hand held ...
Dwyer Instruments 475 series Mark III hand held digital manometer measures positive, negative or differential pressures of air and natural gases. The dual push buttons on the front panel control the on/off, auto zero, and pressure unit selection, allowing for simple operation with no set-up needed. When used with a ...
Simultaneous display of current and pressure readings8 units ...
Simultaneous display of current and pressure readings8 units for pressure (k Pa, h Pa, Pa, mH2O, h Hg, psi, inch H2O, inch HG)2 units for current (m/s, fpm)Integrated density compensation Adjustable attenuation for moving averaging Min. / max. measurements Hold button to retain reading Display illumination On-site print-out with testo ...
Both instruments feature a dust and waterproof case ...
Both instruments feature a dust and waterproof case to IP67 and can measure positive or negative (vacuum) gauge single input or differential pressures. Choice of nine displayed scales Recording and display, in any scale, of max. and min. pressures Hold facility Adjustable zero Transient reading averaging filter Auto switch off ...