20 → 70W Light Transformer, 230V ac, 11.5V

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Single O/P Round Dimmable Mini Electronic Transformer

IP20 independent transformer for 12 V halogen lamps
Class II protection against electric shock following direct and indirect contact
The transformer is supplied with cables on the primary and secondary circuits
Excellent operating reliability at very high temperatures (ta = 45 °C; tc = 90 °C)
Small compact size
Easy assembly and installation
Protected against overheating, short-circuits, voltage spikes and overloads

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Specifications
Attribute Value
Primary Voltage Rating 230V ac
Secondary Voltage Rating 11.5V
Power Rating 20 → 70W
Dimensions 53 (Dia.) x 22mm
Depth 22mm
Minimum Load Requirement 20W
Maximum Temperature +45°C
Weight 70g
Type Electronic
Dimming Dimming
Dimming Method Trailing Edge
Termination Type Lead Wire
Standards Met EN 55015, EN 60598-1, EN 61000-3-2, EN 61347-1, EN 61347-2-2, EN 61547, EN61047, VDE 0710-T14
Diameter 53mm
Minimum Operating Frequency 50Hz
Protection Features Over Voltage Protection, Overheating Protection, Overload Protection, Short Circuit Protection
Maximum Operating Frequency 60Hz
36 In stock for FREE next working day delivery
Price Each
£ 14.01
(exc. VAT)
£ 16.81
(inc. VAT)
Units
Per unit
1 +
£14.01
Related Products
High quality safety and isolating transformers designed for ...
Description:
High quality safety and isolating transformers designed for use in control circuits and general applications Low loss noise laminations Dual standard primary winding 230 / 400Vac with +15V tap for input flexibility Dual secondaries are centre tapped. Earth terminal provided Varnish impregnated for overall protection against humidity and rustingFully shrouded ...
Safety isolating and isolating control transformersTwin secondary winding ...
Description:
Safety isolating and isolating control transformersTwin secondary winding for series or parallel connection63,100,160 and 250VA transformers can be mounted on standard 35mm DIN railAll units have 4 hole panel mount fixingsEasy installation 4mm² cage clamp terminalsInsulation catagory Class B.
Twin 115Va.c. 50 to 60Hz primary windings for ...
Description:
Twin 115Va.c. 50 to 60Hz primary windings for series or parallel connectionTwin secondary windings for series or parallel connectionLow profile compact designVacuum epoxy resin moulded to UL94-V0 ratingDouble section glass fibre reinforced polyamide bobbins100% electrical and flash testedLow inter-winding capacitanceLow radiated noiseExtra fixing holes for secure board mountingStandard: EN60742, VDE ...
Single and twin secondary windings for series or ...
Description:
Single and twin secondary windings for series or parallel connectionVacuum resin moulded to UL94-V0 ratingLow inter-winding capacitanceLow radiated noise100% electrical and flash testedExtra fixing points for secure board mounting (25 VA and 36 VA).