Osram 854106, Electronic Fluorescent Light Starter, 36 → 65 W, 220 → 240 V ac

  • RS Stock No. 192-1908
  • Mfr. Part No. 854106
  • Brand Osram
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

OSRAM ST111/ST151/ST171 Starters

Introducing the ST111/ST151/ST171 series of fluorescent tube lamps starters from OSRAM. These high-quality devices have been designed to ignite every time, reliably and quickly. Each starter is a subject to strict manufacturing and quality control tests. Thanks to using the excellent quality components, these starters ensure long-life operation of up to 4 years and extend the lamp life by 20%. The case is made of Makrolon (self-extinguishing plastic) and meet the conditions laid down for protection class II.

Features and Benefits:

• DEOS® ST 171 SAFETY, DEOS® ST 172 SAFETY and DEOS® ST 173 SAFETY are safety starters
• DEOS® ST 172 SAFETY is a safety starter for series circuits (tandem circuits)
• DEOS® ST 171 SAFETY, DEOS® ST 172 SAFETY and DEOS® ST 173 SAFETY are designed to operate with conventional control gear (CCG) and low-loss gear (LLG)
• They reliably disconnect burnt-out or faulty lamps under inductive or capacitive operating conditions
• They are instantly ready for operation when the red button is pressed in (there must be an audible click)
• The automatic cutout circuit protects the choke and the starter itself
• Four times the life of conventional starters
• To ensure reliable ignition and operation the DEOS® ST should be replaced after every four lamp replacements.
• Temperature range for reliable cutout: -20°C…+80°C
• Extends the lamp life by 20%
• Self-extinguishing plastic casing made of Makrolon. Class V2
• Equipped with special radio-interference suppression capacitor (foil winding capacitor)
• Suitable for 220V-240V AC operation. 50/60 Hz, series circuit and single circuit 4W ...22W at 110V/127V

NOTE: To ensure reliable ignition we recommend that you also replace the starter when you replace the lamp. Starters cannot be used for OSRAM DULUX S/E, D/E, T/E or T/E IN lamps.

Approvals and Certification:

• ENEC 10 VDE
• Protection Class II

Typical Applications:

Lighting starters, also known as glow tube starters or tube light starters are devices designed to preheat the electrodes of fluorescent lamps and generate an ignition pulse. Fluorescent starters are an integral element of every fluorescent lighting set.

FAQs:

Can Fluorescent Lamps work without a starter?
No, Fluorescent lamps cannot work without a starter. A starter is required to generate an ignition pulse. Once that process is initiated, the ballast takes over providing sufficient voltage and regulating the current.

My brand new lamp fails to ignite but the starter switches without interruption. What causes the problem?
The lamp you installed probably doesn't ignite because of its wrong voltage. Please, check the lamp and replace with the correct voltage one if necessary. Also, if possible replace the starter.

Non-Series starter is rated at 230 V ac

Specifications
Attribute Value
Type Electronic
Wattage 36 → 65 W
Voltage Rating 220 → 240 V ac
Number of Lamps 3
Number of Pins 2
100 in stock for FREE next working day delivery
355 available from Europe for delivery within 1 working day(s)
Price Each (In a Pack of 5)
£ 5.13
(exc. VAT)
£ 6.16
(inc. VAT)
Units
Per unit
Per Pack*
5 +
£5.13
£25.65
*price indicative
Related Products
Taylor made for the Megaman Clusterlight 200W compact ...
Description:
Taylor made for the Megaman Clusterlight 200W compact fluorescent lamp (RS 678-4603)Flicker free operation with stable light output over fluctuation of Voltage supply Automatic restart capability when short-circuited of overload is absent Equipped with main harmonics reduced by an active harmonics filter Meets international standards for electromagnetic interference Facilitates easy ...
ELT high frequency ballast, Class I for built-in ...
Description:
ELT high frequency ballast, Class I for built-in use. This multipower electronic ballast Operates two T8 lamps. Class I for built in use Ignition with pre-heating in cathodes for long lamp life without flashes and flickering Constant total power and stabilized luminous flux High frequency operation and high energy efficiency ...
ELT high frequency ballast, Class I for built-in ...
Description:
ELT high frequency ballast, Class I for built-in use. This multipower electronic ballast Operates two T8 lamps. Class I for built in use Ignition with pre-heating in cathodes for long lamp life without flashes and flickering Constant total power and stabilized luminous flux High frequency operation and high energy efficiency ...
This ELT Linear high frequency ballast is built ...
Description:
This ELT Linear high frequency ballast is built using environmentally friendly components and has a long life of 80,000 hours. This universal voltage electronic ballast operates T5 lamps. 80,000 hour ballast warranty Optimal operation at universal rated voltages between 100-277V ac and 160-300V dc Automatic identification of lamp type Lamp ...