Marl Red LED Indicator Lamp, 24 → 28V dc, BA9s Base, 4.9mm Diameter, 11000mcd
- RS Stock No.:
- 238-8188
- Mfr. Part No.:
- 215-501-23-38
- Brand:
- Marl
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 238-8188
- Mfr. Part No.:
- 215-501-23-38
- Brand:
- Marl
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
T3 BA9s MBC Ultra-Bright LEDs
Integral resistor allows direct connection to either 12, 24, 28, 60 or 110Vdc supplies
Note
These LED’s should only be used with suitably rated lampholders. Live parts should be inaccessible when in use. 110Vac LED’s cannot be used with a dropper resistor on 230Vac
MARL, Single Chip LED’s
A series of ultra-bright, sunlight-readable, water-clear LED’s suitable for a variety of applications. Specially manufactured lens provides a very wide viewing angle and high intensity output. Intensities are stated at the following viewing angles for the LED’s: Red 30°, Green 15°, Yellow 16°, Blue 15°, White 45°.
Specifications
Attribute | Value |
|---|---|
| Voltage Rating | 24 → 28V dc |
| Light Output Colour | Red |
| Lamp Type | LED |
| Intensity | 11000mcd |
| Lamp Base | BA9s |
| Chip Type | Single Chip |
| Diameter | 4.9mm |
| Length | 26mm |
| Viewing Angle | 120 ° |
| Peak Wavelength | 643nm |
| Current Rating | 20mA |
| Life Hours | 100000h |
- RS Stock No.:
- 238-8188
- Mfr. Part No.:
- 215-501-23-38
- Brand:
- Marl