- RS Stock No.:
- 188-9216
- Mfr. Part No.:
- STLD40DPUR
- Brand:
- STMicroelectronics
- RS Stock No.:
- 188-9216
- Mfr. Part No.:
- STLD40DPUR
- Brand:
- STMicroelectronics
Technical Reference
Legislation and Compliance
Product Details
STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSWis fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the LED current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. By applying a low frequency PWM signal the LEDs can be dimmed. The maximum peak inductor current can be programmed by connected a resistor RSETto the pin RSET.
Inductor switches boost controller
PFM mode control
High efficiency over wide range of input voltage from 3.0 V to 5.5 V
Over voltage protection with automatic restart
Adjustable peak current limit
Enable pin with possibility of PWM dimming control
Low shutdown current < 1 μA
Small external component
Good load and line regulation
QFN8 3 x 3 mm
Applications
White LED supply for LCD backlight
Mobile phone
PDA and organizers
Any handsets powered form 3.0 V to 5.5 V
PFM mode control
High efficiency over wide range of input voltage from 3.0 V to 5.5 V
Over voltage protection with automatic restart
Adjustable peak current limit
Enable pin with possibility of PWM dimming control
Low shutdown current < 1 μA
Small external component
Good load and line regulation
QFN8 3 x 3 mm
Applications
White LED supply for LCD backlight
Mobile phone
PDA and organizers
Any handsets powered form 3.0 V to 5.5 V
Specifications
Attribute | Value |
---|---|
Package Type | QFN |
Display Type | LED |
Number of Pins | 8 |
Supply Voltage | 3 → 5.5 V |
Maximum Supply Current | 20mA |
Minimum Operating Temperature | -40°C |
Mounting Type | Surface Mount |
Maximum Operating Temperature | +85°C |
Width | 3.15mm |
Height | 0.95mm |
Length | 3.15mm |
Related links
- Texas Instruments TLC59213AIPWT TSSOP Display Driver 20 Pin, 3 → 5.5 V
- STMicroelectronics STP16CPC26PTR QSOP Display Driver 3 → 5.5 V
- STMicroelectronics STP16CPC26MTR SO Display Driver 3 → 5.5 V
- STMicroelectronics STCS1APHR SO Display Driver 3 → 5.5 V
- STMicroelectronics STP08CP05TTR TSSOP Display Driver 3 → 5.5 V
- STMicroelectronics STCS2SPR SO Display Driver 3 → 5.5 V
- STMicroelectronics STP08DP05TTR TSSOP Display Driver 3 → 5.5 V
- STMicroelectronics ALED1642GWXTTR TSSOP Display Driver 3 → 5.5 V