Ambersil Flaw and Leak Spray, Cleaner, 400ml, Aerosol

  • RS Stock No. 495-4967
  • Mfr. Part No. 30288-AB
  • Brand Ambersil
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Ambersil Flaw And Leak Spray

The Ambersil 400ml flaw and leak spray is a quick-drying solvent cleaner/degreaser and an excess penetrant remover for the non-destructive testing of metal surfaces for liquid penetrant inspection. The engineering materials can have several deep cracks despite the small opening width on the surface. This can cause serious defects. Such cracks may be difficult to detect by normal visual inspection. However, penetrant flaw detection is an extension of the visual inspection method that highlights these invisible defects. It is a fast-drying, powerful degreasing solvent blend free of 1,1,1-trichloroethane or other chlorinated solvents for the removal of dirt, grime, and contaminants. It is formulated for the pre-treatment of the surface, before the liquid penetrant inspection and to remove all visible, coloured traces of the penetrant.
Part 1 - Cleaner
A powerful solvent cleaner to flush oil, swarf or soiling that may be obscuring the defect.
Its important features are:
Powerful flush action
Fast evaporation
Low odour, safe to use, non-chlorinated
Part 2 - Penetrant
A highly visible low surface tension dye that will quickly find its way into the smallest crack or flaw. Its important features are:
Can also be applied to the underside of components or structures
Easily removed by the solvent cleaner
Part 3 - Developer
A white chalk contrast medium that offers maximum visibility against the red penetrant fluid.
Its important features are:
Dries quickly to form a white powder coating
Does not run-off
Easily removed after inspection
Allows the effective 'bleed-through' of the penetrating dye

Features and Benefits

Effective wash-away of contaminants and coloured penetrant
Fast evaporation to minimize downtime
Leaves no residue
Quickly dissolves grease, oil, lubricants, tar and adhesives
Safe on most plastics, coatings, and rubbers (test prior to use)
Stable, non-staining, and non-corrosive

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specifications
Attribute Value
Flaw Detection System Cleaner
Pack Size 400ml
Product Category Aerosol
261 In stock - FREE next working day delivery available
Price Each
£ 8.82
(exc. VAT)
£ 10.58
(inc. VAT)
Units
Per unit
1 - 5
£8.82
6 - 14
£8.47
15 +
£8.29
Related Products
Water-based spatter agent which gives exceptional results without ...
Description:
Water-based spatter agent which gives exceptional results without the use of harmful solvents, silicones or mineral oils. Odourless, non-flammable and safe in use Fine spray pattern ensures total control and economical coverage Prevents spatter adhesion on welding equipment, work pieces,surfaces, jigs and surrounding areas Allows post welding operations, painting, plating, ...
The CRC 500ml multipurpose lubricant is used for ...
Description:
The CRC 500ml multipurpose lubricant is used for preventing electrical and electronic malfunction caused by water penetration, humidity, condensation or by corrosion. It is stable and has low surface tension with the high capillary action formula, which provides great penetrating and spreading power. Cleans, lubricates, protects, penetrates and loosens corrosion ...
The CRC MINUS 45 aerosol is the universal ...
Description:
The CRC MINUS 45 aerosol is the universal cold spray of 500ml. It is highly pure, the inert refrigerant has non-flammable characteristic and a low global warming potential. It is ideally suited for rapid cooling of small components, functional testing of thermocouples and locating thermal faults in electronics. • Freezing ...
The Rocol 400ml Food Lube dismantling lubricant is ...
Description:
The Rocol 400ml Food Lube dismantling lubricant is a non-toxic, fast-acting, penetrating spray that provides short-term corrosion protection for corroded threaded fasteners and other seized components. This spray is NSF H1 registered for incidental contact with food making. It is ideal for use in food, pharmaceutical and other industries where ...