FTDI Chip, 48-pin VNC2 Vinculum USB Daughter Board - V2-EVAL-EXT48

  • RS Stock No. 708-0117
  • Mfr. Part No. V2-EVAL-EXT48
  • Brand FTDI Chip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Vinculum VNC2 USB Host Development Kit

V2-Eval Board is intended for use as a hardware platform to enable easy evaluation of FTDI“s Vinculum-II VNC2 series of embedded USB Host / Slave controllers. The V2-Eval Board includes all the necessary components required by a user to begin developing USB Host / Slave system applications based on the VNC2 device.

VNC2 daughterboards support 32-, 48- and 64-pin QFN packages (not included in kit)
Two USB type A connectors for connecting to USB slave peripherals
VNC2 I/O port connectors grouped by port name/or function
FT42232H USB to quad channel UART device for VNC2 programming & debug functions
USB type B connector for connection to PC host via FT4232H
4xUser-programmable LEDs
4xUser-programmable push button switches
Board supply voltage: +4.75 to +5.25V
Board supply current: 60mA (with no USB devices on USB1 or USB2 port)
I/O connector power output: +5V @ 150mA, +3.3V @ 150mA
Base board dimensions: 167 x 156 x 1.5mm (LxWxH)
VNC2 daughterboard dimensions: 37.9 x 32.48 x 10mm (LxWxH)

Note

Daughterboards are NOT included in the kit.

Supplied with

USB A/B cable to connect to a host PC in programming / terminal emulation or debugging modes, gender-changer for USB slave mode applications (Kit only).

Specifications
Attribute Value
Interface Function USB
Kit Classification Daughter Board
Kit Name 48-pin VNC2 Vinculum
5 In stock for FREE next working day delivery
Price Each
£ 11.06
(exc. VAT)
£ 13.27
(inc. VAT)
Units
Per unit
1 - 4
£11.06
5 - 9
£10.62
10 - 24
£10.20
25 - 49
£9.38
50 +
£8.63
Related Products
The NCV7428 is a System Basis Chip integrating ...
Description:
The NCV7428 is a System Basis Chip integrating power supplies, undervoltage detection and a LIN bus transceiver typically for automotive Electronic Control Unit (ECU) applications. This device is AEC-Q100 qualified for automotive use. • Output supply voltage: +3.3V (NCV7428D13), +5V (NCV7428D15) • Output supply current: 70mA • Undervoltage detector with ...
The FT245B and FT245R are USB to parallel ...
Description:
The FT245B and FT245R are USB to parallel FIFO converter interfaces. Single chip USB to parallel FIFO bidirectional data transfer interface Entire USB protocol handled on the chip - No USB-specific firmware programming required FT245B USB compatible FT245R USB 2.0 Full Speed compatible FT245R with the FTDIChip-ID security dongle feature. ...
Extension board for STM32 mikromedia Plus. USB Mini-B ...
Description:
Extension board for STM32 mikromedia Plus. USB Mini-B connector for on-board FTDI USB-UART chip RJ-45 Ethernet connector CAN transceiver CAN screw terminals Power supply screw terminals4 x mikro BUS sockets Side connection pads Ground pins for oscilloscope probes.
Extension board for PIC32MX7 mikromedia Plus. USB Mini-B ...
Description:
Extension board for PIC32MX7 mikromedia Plus. USB Mini-B connector for on-board FTDI USB-UART chip RJ-45 Ethernet connector CAN transceiver CAN screw terminals Power supply screw terminals4 x mikro BUS sockets Side connection pads Ground pins for oscilloscope probes.