FTDI Chip, Bridge Evaluation Board Bridge Evaluation Board for FT602 - UMFT602A

  • RS Stock No. 146-8970
  • Mfr. Part No. UMFT602A
  • Brand FTDI Chip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The UMFT602A/X evaluation/development modules feature either HSMC or FMC (LPC) connectors for interfacing FTDI Chip's FT602 32bit FIFO bus to USB 3.1 GEN 1 USB video class (UVC) bridge IC with external hardware. The UMFT602A/X allow for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT602. As daughter cards, the UMFT602A/X must work with FIFO master boards which have either a HSMC or FMC connector.

Supports USB 3.1 GEN 1 Super Speed (5Gbps)/USB 2.0 High Speed (480Mbps) transfer
Up to 4 video input channels
High speed connector for FIFO bus
FMC connector is compatible with most Xilinx FPGA reference design boards
Multi powered options: external DC powered, BUS powered, FMC/HSMC powered
Hardware Reset

Specifications
Attribute Value
Interface Function Bridge
Kit Classification Evaluation Board
For Use With FT602
Kit Name Bridge Evaluation Board
9 In stock for FREE next working day delivery
Price 1 Box of 1
£ 57.92
(exc. VAT)
£ 69.50
(inc. VAT)
Box(es)
1 - 1
£57.92
2 +
£48.80
Related Products
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI interface pins on the VNC1L device via its AD and ...
The VDrive2 module provides an easy solution for ...
Description:
The VDrive2 module provides an easy solution for adding a USB Flash disk interface to an existing product. Only four signal lines plus 5V supply and ground are required to be connected. One USB "A" socket to connect to a USB Flash DriveLink selectable UART or SPI interfaceEasy to implement ...
The UM232H is a USB-to-serial/FIFO development module in ...
Description:
The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UM232H is ...
UMFT200XD is a breakout board that converts USB ...
Description:
UMFT200XD is a breakout board that converts USB 2.0 Full-Speed to IC two-wire serial bus interfaceThe module plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connectorThe IC interface operates at +3.3VInput/Output pins are 5V tolerant. ...