SEGGER for J-Link Probes - 8.07.02 USB Isolator

  • RS Stock No. 131-1337
  • Mfr. Part No. 8.07.02 USB Isolator
  • Brand SEGGER
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

J-Link USB Isolator Board

The J-Link USB Isolator may be connected in a J-Link Probe to Host PC USB link to provide electrical isolation. This is essential when development tools are not connected to the same ground as the application.

Compatible Probes

• All J-Link tools and production programmers that use USB

Features

• 3kV DC transformer isolation for 1sec
• Propagation delay: Maximum 70ns
• Maximum 200mA VBus current to J-Link Probe
• USB 2.0 FS capable
• Short-circuit protection
• Host connection: mini-USB
• J-Link connection: USB-A
• 2 x LEDs: VBus Power On and VBus Overload

Specifications
Attribute Value
For Use With J-Link Probes
1 In stock for FREE next working day delivery
Price Each
£ 159.57
(exc. VAT)
£ 191.48
(inc. VAT)
Units
Per unit
1 +
£159.57
Related Products
The emPower eval board provides a comprehensive set ...
Description:
The emPower eval board provides a comprehensive set of SEGGER’s middleware products, accelerating the start of any embedded project. SEGGER’s embOS real-time operating system is at the heart of the evaluation. Furthermore, evaluation versions of the file system emFile, graphics library emWin, emUSB Host & Device, and TCP/IP stack embOS/IP ...
An evaluation module from Texas Instruments for the ...
Description:
An evaluation module from Texas Instruments for the BQ34Z100 wide-range fuel gauge IC, suitable for use with Lithium ion (Li-ion), Nickel metal hydride (NiMH) and Nickel Cadmium (NiCd) battery types when used with an EV2300 USB adapter and Windows™ based PC software (downloadable from the TI.com website). The module can ...
The Pmod RJ45 connector modules can offer an ...
Description:
The Pmod RJ45 connector modules can offer an extended wired connection between two different systems. Shipped as a pair of male and female modules, users can connect the two together with an Ethernet cable to communicate via the Ethernet protocol or as simple GPIO lines. Standard RJ45 (8P8C) portMale and ...
J-Link PLUS is a JTAG programming and debug ...
Description:
J-Link PLUS is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Comes with integrated licenses for unlimited breakpoints in ...