Megger MIT420 2, Insulation Tester 1000V 200GΩ CAT IV 600 V RS Calibration

  • RS Stock No. 921-8749
  • Mfr. Part No. 1006-339
  • Brand Megger
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Megger MIT 420 mk2 Series Insulation & Continuity Testers

Meggers MIT420/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case.

All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options.

Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications.

Stabilised insulation test voltage
600 V TRMS AC and DC voltage measurement
Live circuit detection and protection
CAT IV 600 V & IP54
Weatherproof, rated to IP54
Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH)

Standards

EC1010 and BS EN 61557

Supplied with

Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries

Megger Insulation and Continuity Testers

The Megger MIT420/2 insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. e. 10-20%. All the primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage between 50V and 1000V in 10V steps where application-specific test voltages are required that do not appear in the standard ranges. It supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries.

Features and Benefits

• Insulation testing up to 1000V and 200Gohm range
• Polarisation index, dielectric absorption ratio, variable test voltage and result storage
• Stabilised insulation test voltage (New)
• Single range, faster continuity testing ranging between 0.01ohm and 1Mohm (New)
• 600V TRMS AC and DC voltage measurement
• Live circuit detection and protection
• User variable insulation test voltage ranging between 100V and 1000V (New) depending on the model
• Test result storage and Bluetooth® downloading depending on model
• Rechargeable options for mains and car charging (New) depending on mode

Applications

• Industrial sites
• Cable testing
• Motor testing
• Automotive
• ESD
• Panel building
• Avionics
• Maintenance activities

Certifications

• CAT IV 600V
• IP54 rated

Specifications
Attribute Value
Tester Type Insulation Tester
Minimum Test Voltage 10V
Maximum Test Voltage 1000V
Maximum Insulation Resistance Measurement 200GΩ
Display Type Analogue, Dual Digital
Calibrated RSCAL
Test Current 205mA
Battery Life 2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT IV
Safety Category Voltage 600V
Safety Category CAT IV 600 V
Weight 775g
Battery Type Alkaline
Model Number p MIT420 2
Width 50mm
Length 92mm
Height 220mm
Dimensions 92 x 50 x 220mm
38 In stock for delivery within 2 working days
Price Each
£ 574.00
(exc. VAT)
£ 688.80
(inc. VAT)
Units
Per unit
1 +
£574.00
Not available for guaranteed pre 9am/10am delivery
Related Products
The PROFITEST INTRO provides professional electricians with a ...
Description:
The PROFITEST INTRO provides professional electricians with a universal, compact and rugged, state-of-the-art measuring tool. The MT520T test instrument is capable of executing all measurements for testing the effectiveness of safety measures in electrical systems as required by IEC 60364-6 (DIN VDE 0100-600) and other countryspecific standards, and as specified ...
The IN2101 is a compact, hand held electrical ...
Description:
The IN2101 is a compact, hand held electrical insulation tester which performs fast and accurate testing at 500 V with automatic discharge after test. Manufactured from durable ABS, the IN2100 Series electrical insulation testers are designed to withstand the toughest on-site environments. It features a large, clear, backlit LCD display ...
Measures up to 30 TΩUnique dual-case design - ...
Description:
Measures up to 30 TΩUnique dual-case design - additional user protection Operates from battery or a.c. mains supply Rapid charge Li-ion battery Advanced memory with time / date stamp Insulation resistance up to 30 TΩ @ 15 kV, 20 TΩ @ 10kV, 10 TΩ @ 5 k VMeasures capacitance of ...
A range of insulation testers that meet the ...
Description:
A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing. 20mm LCD display with true analogue response Tough rubber armoured case with self contained display cover ...