Fluke 1503, Insulation Tester 1000V 2GΩ CAT III 600 V, CAT IV 600 V RS Calibration

  • RS Stock No. 528-9343
  • Mfr. Part No. FLUKE 1503
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Fluke Insulation Tester

The Fluke 2G ohm electrical insulation tester is compact, rugged, reliable and easy to use. With its multiple test voltages, it is ideal for many troubleshooting, commissioning and preventative maintenance applications. It comes with a remote probe due to which repetitive or hard-to-reach testing is made easy. Test leads, probes and alligator clips are also included. The testing voltage of this tester ranges between 500V and 1000V. This device is battery powered and has 4 AA battery type.

Features and Benefits

200mA Continuity
AC/DC voltage ranges between 0.1V and 600V
Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
Auto discharge of capacitive voltage for added user protection
Insulation test ranges between 0.1MΩ and 2000MΩ
Live circuit detection prevents insulation test if voltage > 30V is detected for added user protection
Read measurements easily with large, graphic backlit display
Remote probe, test leads, probes and alligator clips included with each tester
Resistance ranges between 0.01Ω and 20.00kΩ
Save battery power with auto power OFF

Certifications

ANSI/ISA 82.02.01
CAT III 600V
CAT IV 600V
CE certified
CSA certified
IEC/EN 61010-1
IP40 rated

Specifications
Attribute Value
Tester Type Insulation Resistance Tester
Minimum Test Voltage 500V
Maximum Test Voltage 1000V
Maximum Insulation Resistance Measurement 2GΩ
Display Type Graphic Display - Backlit
Calibrated RSCAL
Test Current 200mA
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III, CAT IV
Safety Category Voltage 600V
Safety Category CAT III 600 V, CAT IV 600 V
Length 203mm
Width 100mm
Height 50mm
Dimensions 203 x 100 x 50mm
Battery Type AA
Model Number p 1503
Weight 550g
8 In stock for delivery within 2 working days
Price Each
£ 394.00
(exc. VAT)
£ 472.80
(inc. VAT)
Units
Per unit
1 +
£394.00
Not available for guaranteed pre 9am/10am delivery
Related Products
Test box designed to provide confirmation that electrical ...
Description:
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations. Tests the full range of a testers capability.Does not trip RCD protected circuits.Tests to regulations BS7671, BS EN61557 & IEE On-Site Guide.Checks insulation, continuity, loop, PFC & RCD ...
A comprehensive PAT and Installation instrument verification system ...
Description:
A comprehensive PAT and Installation instrument verification system in one rugged, drop-proof enclosure. It allows on-going performance checks to be carried out on test equipment to ensure accurate measurement between calibration intervals. Tests verified: Earth Continuity, Insulation Resistance, RCD Trip Time, RCD Trip Current, Loop, PE Conductor Current, Touch Current ...
Devices which are equipped with a 5-pole, 16 ...
Description:
Devices which are equipped with a 5-pole, 16 A / 6 h CEE plug can be quickly and efficiently tested with the AT16-DI CEE adapter. Connect the adapter to a test instrument designed for testing portable devices in accordance with DIN VDE 0701-0702 in order to perform testing per DIN ...
Ensure safe and reliable testing of light points ...
Description:
Ensure safe and reliable testing of light points with the Light-Check Adapters. The adapters can be used in conjunction with a wide variety of test equipment that use test leads terminating in 4 mm safety connectors. The adapters enable a range of tests to be conducted on light fitting terminals, ...