INA126PA Texas Instruments, Instrumentation Amplifier, 0.5mV Offset, 3 [arrow/] 28 V, 8-Pin PDIP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Instrumentation Amplifiers, Single, Texas Instruments

The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals (AC power line frequency) are present.

Instrumentation Amplifiers, Texas Instruments

Instrumentation amplifiers are composite differential amplifier blocks generally incorporating a classic three operational amplifier configuration. They provide high input impedance, very high common-mode rejection and allow differential gain to be accurately set via internal or external resistors. Differential amplifiers offer low DC offset and drift coupled with high open loop gain and low noise and are frequently used in high-precision test and measurement applications and electrically noisy environments.

Specifications
Attribute Value
Power Supply Type Dual
Package Type PDIP
Mounting Type Through Hole
Typical Single Supply Voltage 3 V, 5 V, 9 V, 12 V, 15 V, 18 V, 24 V, 28 V
Pin Count 8
Typical Dual Supply Voltage ±15V
Rail to Rail No
Maximum Input Offset Voltage 0.5mV
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Maximum Input Resistance 1GΩ
Minimum CMRR 74dB
Maximum Supply Current 0.2 mA
Height 4.57mm
Length 9.81mm
Dimensions 9.81 x 6.35 x 4.57mm
Width 6.35mm
Price Each (In a Tube of 50)
£ 2.105
(exc. VAT)
£ 2.526
(inc. VAT)
Units
Per unit
Per Tube*
50 - 200
£2.105
£105.25
250 - 450
£1.894
£94.70
500 +
£1.726
£86.30
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
The Texas Instruments LM139, LM239, LM339 and LM2901 ...
Description:
The Texas Instruments LM139, LM239, LM339 and LM2901 are quad differential input voltage comparators designed to operate from a single power supply over a wide range of voltages. The common mode input voltage range includes ground and the devices have open collector outputs.
Programmable Gain Amplifiers are Operational, Instrumentation or Differential ...
Description:
Programmable Gain Amplifiers are Operational, Instrumentation or Differential Amplifiers in which the gain can be programmed or selected, either via hardware (IC pin selection) or software using a serial communications link.
INA2128U | INA2128U Texas Instruments, Instrumentation Amplifier, 16-Pin ...
Description:
INA2128U | INA2128U Texas Instruments, Instrumentation Amplifier, 16-Pin SOIC
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals (AC power line frequency) are present.