RS PRO Green, Red, Yellow Indicator, 24 V dc, 8mm Mounting Hole Size, Lead Wires Termination, IP67

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

RS Pro 8 mm LED Indicators IP67

From RS Pro, these LED’s have been designed for panel mount applications and with an IP67 rating they are suitable for most environments including outdoor applications. They also have a wide operating temperature range of between -40 to +85 °C, further increasing the potential applications they may be used for. These 5 mm LED’s require an 8 mm panel cut-out and are supplied with a fixing nut and spring washer. They come with bright chrome bezels and offer a selection of voltage ratings and bezel styles. All models are highly reliable and excellent quality.

Features and Benefits

• 8 mm panel mounting LED indicator
• 5 mm coloured diffused epoxy lens or 5 mm water clear super bright LEDs
• Bright chrome bezel
• Prominent, recessed and flush bezel styles
• 12 to 28 Vdc
• Wire terminations
• Sealed to IP67
• Viewing angle: up to 100°
• Life expectancy: 100,000 hours
• Operating temperature range: -40 to +85 °C

What kind of protection do these indicators have?

Each LED Indicator is rated at IP67. Although not fully waterproof, it is fully protected from dust and other small particles. It can also be fully immersed in water (up to 1 m depth) for a maximum of 30 minutes. It would depend on the application as to how this feature would be used, but the LED would continue to operate smoothly if the above guidelines are followed correctly.

Why choose LED?

Longevity and low power consumption are the main selling points of an LED. However, there are various other reasons to consider:

• Temperature - LED's give off a far cooler temperature than what an incandescent or neon light would.
• Direction - LED's will only emit light in a single direction, reducing the need for additional components, such as reflectors. Although this wouldn't apply if the LED indicator is being used as a circuit board signal.
• Cost - typically as LED's are in a larger supply than standard bulbs or pilot lights, they are a more cost effective solution to purchase, as well as run.
These LED indicators should not be operated without a suitable series resistor or other current-limiting device

What are the uses of an Indicator?

Uses of indicators fall entirely down to the user. They can be fixed to PCB circuit boards and mounted on push buttons and switches. Primarily, these types of indicators are used within circuit boards and electronic designs. This is due to their relatively small size, as compared with other types of indicators, such as car turn signals.

Are there fixings supplied with these indicators?

Absolutely, each LED indicator is fully supplied with a fixing nut, washer and a gasket. To ensure a quick and easy installation process.



Attribute Value
Voltage Rating 24 V dc
Light Output Colour Green, Red, Yellow
Mounting Hole Size 8mm
Lamp Type LED
Lamp Size 5 mm
Termination Type Lead Wires
IP Rating IP67
Bezel Style Recessed
Bezel Colour Chrome
Current Rating 20 mA
Intensity 10 (Green) mcd, 10 (Yellow) mcd, 20 (Red) mcd
Length 25.5 mm
Available to back order for despatch 07/12/2020
Price Each
£ 5.79
(exc. VAT)
£ 6.95
(inc. VAT)
Per unit
1 - 14
15 - 49
50 - 99
100 - 249
250 +
Related Products
Schurter PSE series are a convenient and reliable ...
Schurter PSE series are a convenient and reliable series of illuminated Piezo switches. This series offers an easy to use coded wire system to tweak the colour & luminosity of the switch.There also is a standard fixed colour option, adding further customisation for your application.The PSE series has been designed ...
A new illuminated halo designed to impress with ...
A new illuminated halo designed to impress with stylish visual feedback using optimal high-quality hyper bright LEDs. The functional design enables the QH series to be easily mounted as a status indicator allied with a broad range of 16 mm, 19 mm and 22 mm switches used in either interior ...
Snap-in fixing requires no additional hardware Super bright ...
Snap-in fixing requires no additional hardware Super bright types with tinted diffused lens355mm long wire lead connection Ultra bright types with water clear lens3 leaded tri-colour types with milky white diffused lens Housing meets UL94V-07.41mm Black housing enhances LED contrast Mounting hole size: 6.35mm. LED Indicators, 6.35mm Mount.
Apem QS series snap-in panel mount LED indicators ...
Apem QS series snap-in panel mount LED indicators with a coloured diffused flat lens, for typical replacement of filament and neon indicators. Applications include domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets and battery chargers/power supplies. 10mm panel cut-out size (tolerance +0.1 and -0.05mm)Front panel ...