Schaffner,6A,250 V ac Male Panel Mount IEC Inlet Filter 2 Pole FN284B-6-06,Faston 2 Fuse

  • RS Stock No. 455-8929
  • Mfr. Part No. FN284B-6-06
  • Brand Schaffner
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Schaffner Dual Fuse Inlet Filter

The Schaffner IEC inlet filter is a male type, dual fused, panel mount device with C14 IEC connector power entry module. It has a voltage rating of 250VAC with 6A high-performance current rating. It is a medical version with a bleed resistor and without Y2 capacitor. The operating frequency of this filter ranges between 50Hz and 400Hz.
Warning:
Neutral line must not be fused where it is referenced to the earth.

Features and Benefits

Convenient, highly-integrated module
Fuse drawer with easy access
Dual-pole rocker switch
Fast-on terminals
Maximum leakage current is 190μA
Operating temperature ranges between -25°C and 85°C

Applications

Electrical and electronic equipment
Medical equipment
Household equipment
Single-phase and switch-mode power supplies
Test and measurement equipment.

Certifications

UL approved
CSA certified
VDE
SEMKO
IP40 rated

Approvals

UL Listed; CSA Certified; VDE; SEMKO

Specifications
Attribute Value
Gender Male
Number of Fuses 2
Fuse Size 5 x 20mm
Switch Type 2 Pole
Termination Method Faston
Current Rating 6A
Voltage Rating 250 V ac
Mounting Type Panel Mount
Operating Frequency 50 → 400Hz
IEC Connector Type C14
Width 50mm
Depth 64.8mm
Height 65mm
435 In stock - FREE next working day delivery available
Price Each
£ 22.23
(exc. VAT)
£ 26.68
(inc. VAT)
Units
Per unit
1 - 4
£22.23
5 - 9
£21.12
10 - 24
£20.01
25 +
£18.90
Related Products
The FN9255 IEC inlet filter incorporates a dual ...
Description:
The FN9255 IEC inlet filter incorporates a dual stage filter into an IEC inlet that offers excellent filter attenuation in a compact housing. Using an IEC inlet, at the point of entry offers an optimized position and practical solution for integrating an EMC filter into any system. A wide selection ...
Power Entry Module with Switch. A two function ...
Description:
Power Entry Module with Switch. A two function power entry module combining a DPST switch and inlet. New 15A rating250 VAC maximum rated voltage Non-filtered Compact size Standard C-14 inlet Snap-in or flange mounting options Optional pre-connected line and switch terminals Same cutout as other Corcom C Series ApplicationsComputer equipment ...
Smallest Power Entry Module with Metric Fuse Holders. ...
Description:
Smallest Power Entry Module with Metric Fuse Holders. Available with an internal ground-circuit inductor (C versions) to isolate equipment chassis from power line ground at radio frequencies. Power entry module with enhanced EMI filter Single or dual fusing Two element circuit provides basic attenuation Available with an internal ground-circuit inductor ...
The FASM combines an EMI filter with an ...
Description:
The FASM combines an EMI filter with an inlet, to provide excellent attenuation in a compact module. It has a low earth leakage of 5μA @250VAC for medical equipment applications. When fitted to mains powered equipment, they provide excellent attenuation to conducted electro-magnetic interference from the mains supply, whilst reducing ...