Parker Steel Zinc Plated Hydraulic Elbow Threaded Adapter, 12EMK4S, G 3/4 Male G 3/4 Male

  • RS Stock No. 797-1978
  • Mfr. Part No. 12EMK4S
  • Brand Parker
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Union Elbow

Equal 90° parallel thread male elbow joint.
Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP
Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, B2 and B4 adapters. Straight fittings can also be used an adaptor with ISO 1179-1 / DIN 3852 ports by using a bonded seal.

Note

K4 adapters are not interchangeable with JIS P4 fittings.

Elbow & Tee Adaptors

BSP parallel threaded adaptors. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C.,The 60° female cone makes these adaptors an ideal port fitting for use with our range of BSP reusable fittings and crimped hose assemblies.

Warning

  • Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
Specifications
Attribute Value
Connector A G 3/4 Male
Connector B G 3/4 Male
Material Steel
Finish Zinc Plated
Connector A - Gender Male
Connector A - Thread Standard G
Connector B - Gender Male
Connector B - Thread Standard G
Maximum Operating Pressure 199 bar
11 In stock - FREE next working day delivery available
Price Each
£ 18.47
(exc. VAT)
£ 22.16
(inc. VAT)
Units
Per unit
1 - 4
£18.47
5 - 9
£17.55
10 - 24
£17.00
25 +
£16.61
Related Products
In-line and jack adaptors for use with ’X’ ...
Description:
In-line and jack adaptors for use with ’X’ series or plastic XLR connectors. The X-Jack has internal flying leads connected to the stereo jack plug end but unconnected to the X-plug end which may be wired to individual requirements. Both X-3F and X-3M are supplied straight wired, i.e. Pin 1 ...
These BNX series MIL-C-38999 Bandstrap adaptors are used ...
Description:
These BNX series MIL-C-38999 Bandstrap adaptors are used with a corrosion resistant steel band (must be ordered separately - see stock number 765-0312) and are designed to terminate a braided cable shield to a connector (Raychem code 40 D38999 connector (see note). The resulting 360° termination creates an electrical connection ...
Cinch Connectivity range of professional grade crimp or ...
Description:
Cinch Connectivity range of professional grade crimp or solder cable mount SMA connectors have a stainless steel body and gold plated contact pin. The SMA connectors are available in a variety of configurations to suit any application. Wide operating frequency range - See manufacturers data sheet for permissible GHz range ...
The Omron E8FC is a transmitter adapter used ...
Description:
The Omron E8FC is a transmitter adapter used with a flowmeter sensor. It is used to measure differential pressure to determine fluid flow. It is made from austenitic stainless steel (SUS304). • It uses 1/2IN R taper thread type.