United Automation PCR-240-1, Hot Swap Controller, 230 V 3-Pin

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Phase Angle Controller - United Automation

Thick film hybrid circuit electrically isolated and with low hysteresis
Provides regulation up to 250W at 240Vrms

RMS max. on state current 1·1 A
Peak one cycle surge current 120 A
Off state leakage current max. 1·5 mA
Minimum holding load current 25 mA
RMS input voltage 50//60 Hz 240 V
Repetitive peak voltage 600 V
Forward volts drop at max. current 1·5 V
Hysteresis (typical) 0·5 %
Total conduction phase angle (typical) 0 to 160°
Controlled conduction phase angle (typical) 30 to 160°
Power transfer at max. current (efficiency) 99 %
Ambient operating temperature -40 to +70°C
Insulation withstand capability 2000 V to 1 min.


may require RFI suppression.

Attribute Value
Typical Operating Supply Voltage 230 V
Mounting Type Through Hole
Pin Count 3
Dimensions 14 x 15 x 4mm
Height 4mm
Length 14mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +70 °C
Width 15mm
Available to back order for despatch 19/03/2020
Price Each
£ 14.01
(exc. VAT)
£ 16.81
(inc. VAT)
Per unit
1 - 9
10 - 19
20 - 49
50 +
Related Products
Linear Technology created a wide range of battery ...
Linear Technology created a wide range of battery charger IC offered in linear or switching topologies. They are suitable for any rechargeable battery chemistry this includes Lithium-Ion (Li-Ion), as well as Nickel Cadmium (Ni CD) and Nickel metal hydride (Ni MH). LTC monolithic switching regulator Xenon Photoflash chargers will allow ...
Linear Technology high voltage Surge Stopper devices for ...
Linear Technology high voltage Surge Stopper devices for the protection of loads from over-voltage and high voltage transient damage. These products will find uses in a variety of applications, such as automotive, avionic, and industrial Surge Protection, Hot Swap™ and Live Insertion systems, High Side Switching for battery-powered systems and ...
Wide Input Supply: −36 V to −80 VTransient ...
Wide Input Supply: −36 V to −80 VTransient Rating to −100 VImproved Transient ResponseΕnable Input (EN)Programmable Current Limit Programmable Current Slew Rate Fault Timer to Eliminate Nuisance Trips Open−Drain Power Good Output (/PG)Wide input voltage range Withstand input voltage spikes to −100 VInput current spike suppression during input voltage transient ...
Provide Safe Hot Swap for +3V to +12V ...
Provide Safe Hot Swap for +3V to +12V Power Supplies with Few External Components Unique Current Regulation Architecture Minimizes n-FET Linear Mode Duration Autoretry Feature (MAX4272/MAX4273)Dual Speed/Bi Level Current Limit Protects Against Current Glitches and Short Circuits Power-On RESET (MAX4273)15V Absolute Maximum Rating Protects Against Inductive Kickbacks During Board Removal ...