Schneider Electric Cable 2.5m For Use With HMI XBTN200, XBTN400, XBTR400, XBTRT500, XBTRT511,

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Programming Cable

Replacement PC programming cable

Schneider Electric Magelis XBT-N

Magelis XBT-N compact display units are designed for use with Schneider Electric Twido, Nano, Micro and Premium PLCs They are used to display status messages, alarm (stock no. 493-3421) and maintenance information as well as process data. Various function keys can easily be configured to modify parameters, issue machine control (eg. START/STOP), or browse through text information menus and pages.

2 fixed legend, service keys (ESC, ENTER), which are non configurable
2 fixed legend, left and right arrow keys, configurable as links to different pages or for machine control.
4 configurable and legend customisable keys (two can be up and down arrows as shown below). The legends are changed by sliding a choice of legend strips behind the front membrane before panel installation. These four keys can be used to latch or toggle PLC bits, to call other pages, or to increment digits in a numerical value (rather like the function of a mechanical thumbwheel)

All the Magelis XBT-N compact display units have the same ergonomic user interface as follows:

Units are configured using Windows based XBT-L1001M software. The user application is built up in pages where each page can be designed, viewed, and simulated in its entirety.

Specifications
Attribute Value
Accessory Type Cable
For Use With HMI XBTN200, XBTN400, XBTR400, XBTRT500, XBTRT511
Cable Length 2.5m
Hazardous Area Certification ATEX
2 In stock for FREE next working day delivery
Price Each
£ 48.00
(exc. VAT)
£ 57.60
(inc. VAT)
Units
Per unit
1 - 4
£48.00
5 - 9
£46.08
10 +
£44.64
Related Products
Various connection cables suitable for use with the ...
Description:
Various connection cables suitable for use with the NT3S "Touch Screen Panels", types available are NT2S-CN002 (Programming cable) which connects a PC to NT3S, 2m length. The NT2S-CN212-V1 (2m length) & NT2S-CN215-V1 (5m length) connect CPM1A / CPM2A peripheral ports. The NT2S-CN223-V2 connects CPM2C / CQM1H / CJ1 / CS1 ...
Hardware requirements; Windows 3.1 or higher, IBM 386 ...
Description:
Hardware requirements; Windows 3.1 or higher, IBM 386 PC or 100% compatible, 4MB RAM (min.), 4MB free hard disk drive, VGA display, serial port. CQM1-CIF02 is a 2m cable which includes an adaptor and converts a peripheral port on the CPU to RS-232RS-232CABLE is a 2m cable connecting directly into ...
DIRIS Digiware range is a hub of technological ...
Description:
DIRIS Digiware range is a hub of technological innovative products that revolutionises the way you measure. The range of products are flexible in installation and make connection and configuration easy. The innovative design and high performance of the DIRIS Digiware range make these products the most effective solution for metering ...
Serial link for point-to-point Data Communication Equipment (DCE: ...
Description:
Serial link for point-to-point Data Communication Equipment (DCE: modem, converter…),1 x RJ45 connector and,1 x 9-way SUB-D male connector. Data rate: 20kb/s to 1Mb/s (bus length dependent)Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory.