RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Alpha Wire Heat Shrink Tubing, Green 3.1mm Sleeve Dia. x 152m Length 2:1 Ratio, FIT-260 Series


Available to back order for despatch 18/05/2021
Add to Basket

Price 1 Reel of 152 Metre(s)

£537.75

(exc. VAT)

£645.30

(inc. VAT)

Reel(s)

Added

RS Stock No.:
821-4960
Mfr. Part No.:
F2601/8 GY002
Brand:
Alpha Wire
COO (Country of Origin):
US
Reel(s)Per ReelPer Metre*
1 - 4£537.75£3.538
5 - 9£510.86£3.361
10 +£483.98£3.184
*price indicative

Alpha Wire FIT-260 Heat Shrink Tubing


Alpha Wire FIT heat shrink tubing offers a reliable means of protecting and sealing terminations or adding greater mechanical robustness. FIT preferred heat shrink products are made from premium compounds under tight manufacturing controls. Because of this, FIT heat shrink tubing has excellent physical attributes including low longitudinal shrinkage and wide operating temperature ranges, while conferring an elegant appearance when used alone or on OEM equipment.


Features and Benefits


Irradiated polyolefin
Shrink ratio 2:1
For 600V ground lead identification
Low longitudinal shrinkage
Operating temperature -55 to +135°C
Chemical, heat and abrasion resistant


Product Application Information


FIT-260 heat-shrink tubing gives you more choices to achieve reliable, rugged cabling systems. Heatshrink provides an easy solution to colour coding wires for easy circuit identification or make fast, reliable repairs to nicked or worn insulation.
For a secure fit, it is necessary that the tubing's recovered diameter (the diameter after shrinkage) is smaller than the diameter of the area to be insulated. At the same time, the tubing's expanded diameter (the diameter before shrinkage) needs to be large enough to fit easily over the area to be insulated, as well as any connectors attached to it.


Benefits of Polyolefin


Polyolefin is a polymer which is often used in heat shrink tubing as it has excellent mechanical and electrical properties. Polyolefin is also flexible, fast-shrinking and can be manufactured in a wide range of colours.


Note

For a secure fit, it is necessary that the tubing's recovered diameter (the diameter after shrinkage) is smaller than the diameter of the area to be insulated. At the same time, the tubing's expanded diameter (the diameter before shrinkage) needs to be large enough to fit easily over the area to be insulated, as well as any connectors attached to it.

Heat Shrink F2601/8 GY002


Size: 1/8
Colour: Green/Yellow

Length: 500 ft


AttributeValue
Sleeve Diameter3.1mm
Shrunk Diameter2mm
ColourGreen
Sleeve TypeHeat Shrink
Adhesive LinedNo
Shrink Ratio2:1
Sleeve Length152m
MaterialPolyolefin
Halogen FreeNo
Standards MetCSA, UL
SeriesFIT-260