Kubler Hall Effect Sensor switching current 70 mA supply voltage 10 <arrow/> 30 V dc

  • RS Stock No. 179-7737
  • Mfr. Part No. 8.IN88.2621.123
  • Brand Kubler
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

The inclinometers of the IN88 series allow measuring 2-dimensional inclinations in the range of ±85° or 1-dimensional inclinations up to 360°. With their high robustness, their high protection level and their wide temperature range from -40°C to +85°C, these devices are ideally suitable for outdoor use – e.g. for mobile automation applications.

Stable accuracy over a wide temperature range from -40°C up to +85°C. High shock resistance up to 100 g and vibration resistance up to 10 g. Versatile Parameterizable filter. Measuring direction 1- or 2-dimensional. With 1 x M12 connector or 2 x M12-connector. Stacked installation possible for redundancy.

Specifications
Attribute Value
Supply Voltage 10 <arrow/> 30 V dc
Maximum DC Voltage 10 <arrow/> 30V
Switching Current 70 mA
Switching Frequency 0.1 <arrow/> 10 Hz
Length 80mm
Width 60mm
Depth 23mm
Dimensions 80 x 60 x 23 mm
Minimum Operating Temperature -40°C
Housing Material Aluminium
IP Rating IP67, IP69K
Maximum Operating Temperature +85°C
Reverse Polarity Protection Yes
1 In stock for delivery within 1 working days
Price Each
£ 283.01
(exc. VAT)
£ 339.61
(inc. VAT)
Units
Per unit
1 +
£283.01
Not available for guaranteed pre 9am/10am delivery
Related Products
CSLW Series miniature, open-loop AC current sensors from ...
Description:
CSLW Series miniature, open-loop AC current sensors from Honeywell. These sensors have a ratiometric output and incorporate a miniature linear Hall-effect sensor which is encapsulated in a PCB-mountable plastic package. A complete sensor is comprised of a sensor IC, flux collector, housing, and wound wire coil. The compact size is ...
Current sensors for electronic measurement of alternating, direct, ...
Description:
Current sensors for electronic measurement of alternating, direct, pulse and mixed currents with galvanic insulation between the primary circuit (strong current) and secondary circuit (electronic circuit).Hall Effect measuring principle.Used with AC variable speed drives, static converters for DC motor drives, battery supplied applications, switched mode power supplies (SMPS) or uninterrupted ...
Flexible alternative to the current shunt or transformers ...
Description:
Flexible alternative to the current shunt or transformers for the isolated measurement of a.c. or d.c. currents. Based on the principle of Hall effect and null balance method. Small footprint Measures dc, ac and impulse currents Large primary conductor hole High accuracy Typical applications include; variable speed drives, overcurrent protection, ...
Hall effect sensors with output proportional to supply ...
Description:
Hall effect sensors with output proportional to supply voltage and the strength of the magnet field Single current sinking or current sourcing linear output Rail-to-rail operation provides more useable signal for higher accuracy Responds to either positive or negative gauss Good temperature stability Typical applications include; current sensor, motor control, ...