A1324LUA-T Allegro Microsystems, Linear Hall Effect Sensor, 3-Pin SIP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems

The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.

Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.

Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.

Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 3
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 5.5 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
404 In stock for FREE next working day delivery
Price Each (In a Pack of 2)
£ 1.67
(exc. VAT)
£ 2.00
(inc. VAT)
Units
Per unit
Per Pack*
2 - 8
£1.67
£3.34
10 - 18
£1.35
£2.70
20 - 48
£1.17
£2.34
50 - 98
£0.99
£1.98
100 +
£0.90
£1.80
*price indicative
Packaging Options:
Related Products
Dual element devices are integrated circuits that contain ...
Description:
Dual element devices are integrated circuits that contain two independent Hall-effect switches. The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the A1232 and A1233 internally process these switch outputs into speed ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacing Laser trimmed thin and thick film resistors-40 to 125°C operating range.
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity magnetic field is required to turn on the output and ...
The Allegro Microsystems A1220, A1221, A1222, and A1223 ...
Description:
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.A south pole turns on the output and a north pole turns off ...